Search results

Well today I experimented. I printed a sheet of decals on 6 mil vinyl, at the end of the day I laminated it with some cheap laminate. Then I put it in my Graftec cutter, added about 50% more pressure and it started to cut light so I added a little more pressure and it was cutting great with one...

Ebay has great deals too. I bought a Graftec 160, 60" cutter and it still had a year left of warranty on it. Warranty ran out but the cutter is still cutting all day every day 16 months later, its bullet proof.

#1: Stop guessing at pressure settings of doing multiple cuts on top of each other. Another way to cut down decals is to do a inner kiss cut and a outer straight cut and let the end user seperate the decal from the backer. (See photos attached) You can print on the background or not. Make the...

Questions: What cutter are you using? What blade are you using (30 or 45 degree)?

When you reopen the job in flexi go to the cut window, click on drop down menu upper right, (as seperate job, print job only, contour cut only) click on contour cut only then send when you have job in cutter ready to cut. But. Before you close that job out click on that drop down menu and click...

I left my two XR640 Rolands at factory settings. Then manually clean around the print heads and the wiper blade area every two weeks.

My Roland XR640 does it too.

What type of file are you printing from? (PDF, JPEG, EPS)

Here is the money making side of the shop. Working on two 24,000 piece orders at the same time and have 42 more orders to get out before Labor day. I've Printed Nine 54"x100' rolls of vinyl this week already and its only Wednesday.

Try a different type of media. If it prints good on Gloss or Matte finish vinyl, it could be Static, Temperature or even the head height.

Ive had a simular problem with a one month old New Magenta head on my Seiko W-64. Tried all kinds of cleanings with no luck. Every one said it was an ink flow problem. So I switched the Magenta head over to the Black head position and the problem carried over. The head was misfireing. Purchased...

Wow Looks Great. Please post new pictures on June 14, 2022. After one year in our shop it looks like a bomb went off. No time to clean up or put things away. I'll post pictures tomorrow.

General Formulations. Call and ask for a distributor near you.

The Roland XR 640 printing magnet material Roll to Roll. 250 piece run

I have an American Flag Magnet on my truck now. Approxmatly 16 months old, still looks good.

Going Thicker gives the consumer a perception of value. Thicker is better in their eyes.

Cant agree with Don McCormick 100%. I print directly to the magnetic material with a Roland and they are not Fuzzy (see samples in photo attached) and I only loose less than 20 individule pieces. I get a good 600 - 3.5×5.0 magnets from a 30" × 50' roll. I cut them all on a Graphtec FC2250.

I think I figured it out.

Thank You for this info. My roland XR 640 just did this today. I'll be cleaning the En oder strip in the morning.

Get two nuts, keep one for a backup