Search results

What can't you do on dual monitors. Once you get used to them you will ask yourself why you waited so long to get the second one. My main design program, Corel, is always open on the Left 22 and Outlook and IE are always open on the right 19. If I am going back and forth between Corel Draw...

I got Nobel Light but the "g" was wrong. Good luck

Post a text print/nozzle check and a close up of the typical banding in question.

Can your cutter cut a big rectangle (12" x 36") and start and stop in the same spot, or another way to put it complete the cut? If not, are your grit and pinch rollers clean? Pieces of vinyl or buildup it can cause the tracking to skew the sheet off to one side. Also if you are trying to...

It's just frustrating when someone wants free help and they don't take the time to provide all the necessary info and pictures.

You either have a deflected nozzles, need to do an alignment, or static. Question: does it do it on both sides on bi-directional and one side on uni-directional? Things to check: 1. Nozzle check test print will verifiy deflected nozzles. 2. Bi-directional alignment will fix alignment, or...

You might get answers if you posted a pic with your post.

Took a pic with my digital camera.

Encoder strip is on the rail the print head runs on. It is on top of that rail and runs the length of the printer and it's clear. It has marks on it that the head reads to double check positioning. Pic below

No more drop downs X3 and X4 they are dockers. They lock on the right side and toggle between several. I love dynamic snapping too.

Any time a USB device is not recognized, remove it from the USB plug, wait a few seconds and plug it back in. USB is plug and play.

Bottom one is Caflisch Script

Korinna Heavy

I give 6 months on install. Any problems created by my installation techniques should surface before then.

http://macromonster.com/index.php?mod=descr&id_desc=21&pageNum_rs_products=10&id=9 here is the macro to auto save older versions RYAROTSKY and its free.

Flash is designed for the web and animation. It's not really made to export to ai, it's made to import from ai. To progress in this business you would be better off learning Illustrator. The sooner you do, the quicker you will learn you were using the wrong program for the job.

I haven't run across any version that I remember the "save as" locking to a version. There might be a macro out there that would do it for you. Search www.macromonster.com

Did you generate it? If not it could be X4. zip it and attach it to your post. I'll give it a try.

I wouldn't want to weed on the wall. There are spots on the wall where the primer and paint doesn't stick well to the dusty mud joints. Early on I pulled paint off walls while positioning the graphic with my masking tape. Now I teach people to stick the tape on their shirt several times like...

I would start with the acrylic paint manufacture. I have seen well made signs that had clear coats on them, and after several years they look bad because they were flaking and pealing. That could be caused by several thing. 1. cheap clear coat or 2. the base and top coats weren't matched in...