• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Font help please

    What font is "Medel"?
  2. font help please

    thank you.
  3. Does anyone know if there is a way for the printer to bypass reading/detecting ink cartridges?

    So once again i got the [M] read error. This time though i take out my cartridge but my printer doesnt detect that it is out. if anyone knows a way on how i can bypass this or a service i can buy so that my printer does not detect ink levels/ cartridges please let me know. I have a mutoh...
  4. Need Help: Acrylic board is 1.5 inches short of fitting properly in sign cabinet

    okay so long story short. i need to put up a couple of acrilic boards in a sign box that is 50 inches tall. the boards i have are 48in. so the boards are just a tad bit short and fall over. what methods can i use so that the boards stay in place and that doesnt require welding. any help is...
  5. What drill and drill bits are best used to put holes in walls?

    So I have to go out up a 3x8 do bond board this week and I know my drill won't be able to cut through the thick wall. I'm wondering what drill do you guys use for making holes in a concrete wall that has steel behind it?
  6. font help please :,(

    ive seen it and used it before but cannot remember what its called uggh
  7. font help please

    thanks for the help
  8. I'm looking for a merchant that sells Mutoh Smart Cards

    My old seller stopped selling them and the ones i bought off of eBay were no good :( . Does anyone have a recommendation of where they buy theirs? Preferably looking for 1L but if 440 is the only card they sell that'll do. thank you.
  9. Do seams on perforated vinyl hold up well?

    So I've installed a lot of perforated signs but never on a window that was bigger than the width of the vinyl. My vinyl roll is 5ft and the window I will be applying the vinyl is 74in tall x 96in wide. Does a seam on perforated vinyl hold up well or does it start to curl back? I'm thinking of...
  10. font help please

    thank you in advance :)
  11. Newb Question: Does Anyone Reclaim Acrylic (plexiglass) Sheets?

    Before Gino comes storming in with his booze, does anyone reclaim old acrylic sheets? I usually toss them on the side of the street or use them as garage sale signs, but i want to know if it is possible to remove all the yellow from sun damage over the years?
  12. Font Help Please

    i vectored the image out but cant find anything online that will match it.
  13. Im Looking For A Sign Shop That Can Build A 2x12 Signbox In Northern California.

    If anyone has a wholesale price on this please message me. Every company i call has been giving me ridiculous prices. thank you.
  14. Is 3m Envision 8048 Laminate Okay For Vehicle Wraps Or No?

    I haven't used a non pvc material before and was wondering if the 3m Envision 8048 laminate was okay for vehicle wraps such as a 2013 honda civic? i'm on fellers and its placed under their "thinner/cast overlaminates" but it doesnt specify if its cast or calendared. any help is appreciated. thanks.
  15. What Font Is This?

    thank you in advance.
  16. Is Instant One Media The Only Seller That Offers Economical Cast Print Vinyl?

    I've been looking all over the web hoping there are other companies that sell cast vinyl but i cannot find any. if any of you know of a supplier can you please let me know below? thank you.
  17. help please what font is this?

    cannot find it anywhere. any help is appreciated. thank you.
  18. Contour cutting way off on graphtec plotter.

    Usually I leave .15in margin on my cuts and that has helped with the uneven cuts, but now my cutter is cutting way off. It cuts right into my prints! This machine is so frustrating to use. Anyone have any idea how I fix this? I've done other cuts at .25in and it still cuts into the print.
  19. Why is my print vinyl "plucking" or "buckling" when it enters the printer?

    Seems like any roll I feed through my printers, buckles up on the back end. I see it happen as soon as I lock my rollers on my printer. I have a mutoh 1624 valuejet. My shop is pretty cold this time of year. Could it be bad rollers or the weather affecting the material?
  20. how can i get these lights off of trailers?

    is there a guide online anywhere on how i can get these off of these little trailers anywhere?
Top