I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
A customer of mine wants Huge Letters, mounted to the wall inside his warehouse. I'm debating if I should use a 3mm ACP or PVC boards inside. I like the fact that my sign Supply sells colored pvc so I don't need to do any painting, but I have yet to read if a CNC cut PVC Board will warp. Letters...
Im trying to get the exact measurements down of a few words but i need them to be in a straight line if that makes sense? below is an example of what i mean.
Another dumb question lol. I think this one might involve a trip to my other home aka home Depot lol.
Okay so I'm doing channel letters (no lights in them & they will go inside a building.) Since I didn't bend and edge on aluminum returns to apply some pop rivets. What glue or adhesive can I...
So a client of mine wants me to make him some UFC signs (the one the girls hold up in the ring). I'm thinking of using either ACP or PVC Board. (most likely going with pvc because of the edges). Does PVC get like foam after it's been cut and require lots of sanding down time? Or is a PVC Board...
Im thinking about getting yellotools sasser cut pro but im unsure if its any good. ive only seen a couple videos online but havent read any reviews. To those who have it, is it any good?
Okay so I'm thinking of pulling the trigger and getting myself an automatic channel letter bender overseas, from the same supplier I got my CNC Router and laminator (which all have worked great). The thing is that their auto channel letter benders do no make flanges and notches in aluminum...
Just got a new bit and thought it would help but actually made it worse. Anyone what I'm doing wrong? I'm moving at 1200mmps and got my spindle spinning at 1500rps. Any advice on this?
Both sides came out ugly :(
So I have a few questions, first I'll start off by asking is a 3mm aluminum composite panel weldable? I haven't seen any videos online and I can't find answers anywhere. Second I want to buy a welder to weld aluminum coil but my shop only has a 120 wall outlet, so a cheaper flux welder is all I...
So I have a couple questions and I'm confused as to where to start. What material is needed to bend the edge on aluminum or I believe also called aluminum fascia? The aluminum will be thin. Or where can I buy aluminum around my area with the lip already bent? Or large 4*8 aluminum sheets?
Looking for a sign shop anywhere in northern california that can offer large format banners for Re-Sellers. I called around a few sign shops local but all are asking $5sqft and up. I need to get an 8ftx8ft banner done. any recommendations of places anywhere from bay area to sacramento?
so i have a .5in thick gator-foam board. I cannot seem to get the setting right for it to not cut the material and leave the edges all jagged. does this problem have to do with the bit or speed and depth on the router?
I'm looking at 3 channel letter Benders and was wondering if anyone uses anyone of these benders? All can bend a maximum of 3.9 inches. I'm just looking for something that's easy to use.
I got a new CNC and Im trying to cut a 1/8 thick acrylic sheet but I can't seem to cut a piece out without it melting the acrylic. Any tips on spindle and depth speed?
I just got a new laptop. I installed flexi 12 to it. When i open the program up it looks as is everything is okay except the deign editor. Its zoomed and i cannot enlarge it. Somes options are completely missing. I called Sai but they couldn't fix it lol, Does anyone how i can fix this?
I have a good customer of mine that wants to put up foam letters across his storefront. The letters are going to be big about 42in tall by 2ft wide and 1in thick. I'm just kind of scared on how I'm going to go at this sign. I've put up foam letters before but the biggest I put up outside where...
Looking to design something out in patterns similar to this but dont know where to start. It just looks crazy imo. Anyone know where i can learn how to do this?
I just got a new CNC machine and it came with a PCI slot card which I connected. It also came with a program called Ncstudio but the program seems corrupted because it just gives me a warning as soon as I open it up. Does anyone how I can connect the CNC to my PC and install the correct driver...
Does anyone here print in a cold shop? i have problems every year around this time with printing. Material tends to give me head strikes when i print. I think its because its too cold in my shop. Does anyone have a solution for this?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.