black

Couple bigger projects were cancelled last year so we are selling our overstocked unpunched cast vinyl in popular black, red and blue colors. Product Quantity Price Oracal 751C-070, 30x50 Black 18 $250.00 Oracal 751C-070, 48x50 Black 5 $400.00 3M 7725-12, 48x50 Black 1 $550.00...

Hi all, I’m just wondering if somebody can explain the differences within the GCR tab during profiling in Caldera v13. basically I’m printing direct to textiles on a DGEN H12 and my pure black is great but the machine is clearly over inking as a rinse test shows run off on the black areas a...

We are using a Roland 54 inch. When we print from Versaworks blacks are great. We use 60/60/40/100. When we print the same job out of Flexi PM using several profiles we just can't get rich blacks. Any suggests or settings that could help. There are so many settings and just not enough literature...

My SP300 started acting up lately. While printing 4" CMYK test squares, I noticed that the cyan square had light coverage and minor overspray and the black square had overspray. I shook each ink cartridge and discovered that the cyan was empty. After replacing the cyan ink cartridge (OEM inks...

A couple months ago I started losing black nozzles on my printer after a few head soaks and cleanings it was back to normal. It worked great for one print then just started dropping nozzles like crazy immediately afterwards. Ended up replacing the capping station, printhead, dampers and print...

I am new to vinyl cutting and got into it as a hobby, so that I could use it for some projects. Does anyone happen to have a 2012 dodge charger e rally stripe vector for Flexi that they would share with me. Thanks for all the help, Michael

Hello, So I have a sign writing job to do with black vinyl. However is there a way to cut black vinyl on the mimaki Cjv30 machine without registered marks? I say without registered marks, because the registered marks are printed in black and will not show up on the black vinyl. Any help is...

Looking for a vendor for laser engraved acrylic. What we are looking to have done are 5"x2.625"x 1/16" layered acrylic, black bottom, white top. Some text will need to be engraved so that the background is black and text is white. Also UID data codes need to be engraved in the same way...

I have a 1224 and noticed my pump request/count for one black set is like 700 when the other inks including the other black set are around 30-40..performance is down in that pair too. What should I check? THANKS! Also did an ink clean out and swap out about 6 months ago with new filters...

I have an Epson S36070 and black ink seems to be coming from the pumping station and running out of the back of the printer. Anyone have any idea of what might be happening or why this might happen. Any help or ideas would be greatly appreciated. Thank you, Kyle

as of a couple of days ago, I started having this issue. The black is going from printing nicely to approx 50% injection after about 20" of printing. Powerful cleaning get the print test back to 98% on black, all other color stay at 100% with beautiful print test. Print head - all dampers -...

Hi everyone, Happy New years eve! As I head into 2017 I wanted to give my printer a cleaning since the blue and black print heads were deflecting a little. So I went a head and put in a cleaning cartridge and drew the cleaning solution through the blue/black print head with a syringe. I...

Hey Guys got a solid deal on a jv33 that had been sitting. I have been soaking the head for the past week adding solution every other day. Using a syringe this morning I used a little pressure through ech chamber on the manifold lines with pretty great success! while doing all of the manifold...

Hey Everyone, I opened my door today and did not realize how close I was to the cement pillar. In the end it looks like I ripped the vinyl they use on the window frame. It is very small and not worried about the white underneath as that is the paint on my car rather than the frame. All...

Client is looking for ghost or stealth or ghost vehicle graphics. Would this be simply black reflective cut graphics or is there an alternative method of producing this. Is there a printable black reflective film if there are layered graphics? Thanks for assistance

If it's not one thing it's another. I've been playing with settings and profiles to dial in my colors. I finally got all that pretty close, and ran a long print on reflective (7' long). At the last 8-12" of the print the black began dropping out and you can see banding. It seems like I read...

Hi everyone, I'm Ludo from New Caledonia and I'm having some trouble with my print head on my Mutoh VJ 1604, since this one isn't working properly, it does some black stripes all over the width of the machine... Anyone with me on this one?!!

Customer wants their logo on the side of a transit in white reflective with a black key line all around it. I am thinking that the only way i can do this is to drop the reflective onto a 2ml black, but the only way that is happening is if I do it wet. Yes I know they say you shouldn't do...

First of all, yes I know it is 10 year technology; but, for the most part it has run fairly flawlessly. Here's the problem. I finished off a fairly big job a couple of weeks ago. I didn't touch my machine for a few weeks because of installs. I fired up my machine this morning to start a job and...

I made the stupid mistake of powering down one of my printers without setting the periodic cleaning to on and then leaving on vacation for a month. Of course when I returned a couple of the heads were blocked. In the process of trying to bring the printer back to life I blew a mainboard fuse...