ink

Hey there! I own a Mimaki CJV150 with SS21 ink for 2 years now and I'm willing to replace this OEM SS21 with Bordeaux MS33 in order to stop losing money with ink. I've read a bit about Bordeaux inks here. Also called Bordeaux and had a general good impression about them, but I'd rather listen...

I removed this (question) post as I found the solution. Thank you.

Any ideas what causes the ink on a vinyl print to smudge when using the squeegee? I doubt that its too much force with the squeegee as it did not happen before? Could it be the material, ink or printer heater settings or something else?

Hello all, I come to you, again, for help. I have been fighting with our Mutoh for two weeks. Friday, Jan 31, It printed fine. The following Monday, Feb 3, it showed a lot of missing segments on the nozzle check. I alternated between cleaning cycles and nozzle checks until I decided that it was...

Hi Guys, I'm new to Uv Printing, only started about a month ago. It's been an interesting learning curve adjusting to Raster Link. Had to make a couple of mistakes, trial and error to learn quickly with the "live" jobs that had come in. Im enjoying it so far. I bought a 2nd hand 4-year old...

My printer keeps beeping and shows M ink end but I just replaced it with a brand new ink ? Any advise here? Mutoh 1617 Hybrid

Hi, Can I ask where may be the cheapest place to buy ink for our Mimaki 3042FX ? It's costing us a fortune replacing ink cartridges that are only half empty when they hit their expiry date. Thanks : )

Greetings everyone, We decided to make the changeover from IJC256 to IJC257. The Application Bulletin here seems to indicate that we don't need to perform the "short flush," which is a process managed by the printer. Instead, my understanding is that it just needs to have a "manual...

I purchased the Epson S40600 four months ago and I was happy with it until the price hike on the inks. Epson increased the price of their GS3 inks for no reason at all, no formula improvement, just price gouging. I suggest going with a printer that has cheaper inks and the option for third party...

I recently had to replace the manifold adapter on my Mutoh 1204. Broke a damper nozzle while changing dampers. We did a complete flushing of the printhead, and everything seemed to be fine. We also replaced the maint. station (genuine Mutoh) and installed a new wiper. We printed with it for 3...

Hey guys, I'm asking someone for help, with this strange issue. I went to my office in a morning, started machine and see ''Subtank refill'' on display. Opened up doors on mutoh and see, under the capping station, the mug full of ink (I'm using mug for dump ink, under the capping station for...

Guys , I have been googling to find the right ink for a printer I just bought. Its a used Mutoh ValueJet 1608 HS Hybrid. It says Standard KMCY 900 ml (2 pack only ) . What does it mean ? What exactly should I buy ? Can you guys recommend some online source ? Thank you

Hey guys and gals just saw this listing on Ebay if anyone is using Roland Tru Vis Inks. https://www.ebay.com/itm/Roland-Tru-Vis-Ink-New-Un-Opened-Cartridges/372716230712

Hi, i don't understand how can evaluate my #ink #limit and what exactly the right file to print in #Ergosoft RIP. When i create a new #print #environment, no profil and no linearization, what setting attribute to maximal ink limit (see my pic included). Maybe no ink limit setting ???

Hi I have a question about when you replace the ink on a HP Latex 365? My designer says that it can be replaced at 20% but I think that too low. Any recommendations?

Hello, My Mimaki CJV30-60 was left sitting idle for a whole year. The nozzles were working perfectly before then. So I recently changed the dampers, tubes and capping station. I also gave the printhead an overnight soak. I went into options and selected Ink Fill Up. Still nothing was coming...

Hello, I'm looking for options for printers for printing on High Intensity (Parking Signs). Currently we have been screen printing them. We're trying to get more with the times and go digital. Ideally the minimum out door life span should be 7 years. Any and all methods would really help. One...

Please see image below: Is this the ink or the image?? HELP...PLEASE

Hi Guys, I need some help iv got a SP300v Iv had for years, they'v been brilliant but a few months ago I come back to work and it had emptied 2 of the ink cartridges all over the floor by where the waste bottle is. if its related the two ink cartridges were really hard to remove. I spoke to...

Hi, I have been using Kiian's HI-PRO ink recently on a JV-300 and since then I have a bubble problem that forms on the captop during a long print. The ink seems very easy to lather. Bubbles that form on the captop cling to the head and produce spots and lines on the print. Has anyone had this...