print head

Hello folks, I have a VersaCamm SP300V that has had some main board problems (that started because of spilling ink on the CK head). The CK head would print nothing. I had a friend put in a new f3 fuse (because it would blow when sub power was turned on). Now I just had him install a c4131...

I am getting HORRIBLE overspray on my prints and I have tried everything to fix it, to no avail so I have ordered a replacement head. I had to replace the black print head a few months ago, so I am comfortable and familiar with the process and don't have a problem with that. It's just that I...

Hi there, i hope im posting in the right place. I have a mutoh valuejet 1614 printer. and the black doesnt want to print. it prints for a little then fades then nothing. any info or advice would be greatly appriciated.

Still having issues with my machine. When I print on Fast mode, I have the problem of the color printing washed out after a few feet. When I print on Normal Mode, I don't have that issue but it prints "hairline" magenta lines in a few different places. It goes away if I stop it and do a soft...

Hi All, Need some suggestions to resolve print head replacement errors... Several days ago, after replacing the magenta ink cartridge, the printer decided it no longer liked the yellow print head.. OK, I happened to have a new one in stock, so I changed it... At first, the printer accepted the...

When I print my Cyan isn't hitting certain spots in the pass nearly as well as others. These spots are usually at the same point in the pass therefore creating a faded or light vertical line on the print. I know the HP 9000 has the calibration/setup print, does the L25500? Could this be the...

I've had my XC-540 for 3 years now (3 years, 4 months, and 6 days to be exact) and I've had ZERO problems thus far. However today I was printing some grey signs and noticed some terrible banding. I did a test print and noticed I had "more than" a few nozzles misfiring on the black head (a few...

Just curious if anyone out there has Printheads for sale for Display maker 72 UVR's? Trying to avoid buying really expensive new heads for a machine so old, but I really need to replace several to get this bad boy back up to full quality again. If not, anyone have any good suggestions on...

How important are the DX2 print head ranking number settings? My supplier says they get a lot of them in from Roland suppliers without ranking numbers, if so..how can one tell which head goes where or are they both the same?

Hello everyone! This is my first posting, but I'll cut to the chase...I've been digging around looking for a decent price on a print head for my newly acquired CJ-500 (converted to eco-sol max). I found that precisionroller.com and National Parts Depot both have what I need (listed as an Epson...

We have had a multitude of problems since we switched to a third party ink. We have used 20/20 ink which I heard was made by Nazdar. Well anyway the test print from the SC-540 is good no missing sections, then we go and print an few graphics and do a test print and there are sections missing. I...

I posted here about a month ago about replacing the cyan head on my mimaki JV3-75 SPII. I finally got around to it and did it myself. the only thing left is to reprogram the head code into the machine. Everything is properly put together, I just need to somehow change the serial code so the...

yesterday i was using my old fj50 (has been trouble free for a decade) and it was printing crazy patterns during the head cleaning run (attached a detailed photo history of the meltdown). i need to replace the burned up head but am concerned that i have a mysterious short loading that ribbon...