print

Hopefully someone can help me with a small problem we're having. We have a VS300 that has drop out problems on one or two colors. I've done all the recommended fixes; manually cleaning, machine cleaning, changed the wiper scrapper, changed the cap station, changed felt and rubber wipers and...

Installed 12.1 here and turned on G7 in the reports. Making a new color profile. G7 now shows on the side but is grayed out. Can't print or measure the P2P target. Anyone know why?

Okay, so my Mutoh has always come up a little short on banners on our banner setting but nothing drastic so we did not adjust. All other materials have always been spot on. Now, my vinyl prints are coming up short...the longer the print the bigger the difference and width-wise it is dead on...

Hello all can anyone help me with double sided printing on a HP 260 printer,Everytime i print side B it starts to print 4 inches after the reg. mark using photoshop 11

When i was using flexi i could scare from the rip. I us some of the bad wrap templates and they are scalled at 720dpi. I could then select it and scale up by 1000%. In onyx i do not see an option to do this. Also in Flexi i could select different panels i wanted to print and not print the...

Hi everyone, I look to print a solvent sticker for a customer. He wants a double face print and stick it inside of the windows. Someone have idea how i can do it and witch material i should use. Tank's

I have a Roland RF-640, it is 2-years old, and out of warranty for 7 weeks. When printing, it stops in the middle of the job, and goes back to the media size screen. It won't print a test print either, just moves like it is printing. I changed the bios battery, checked the fuses, updated the...

Hi everyone, Happy New years eve! As I head into 2017 I wanted to give my printer a cleaning since the blue and black print heads were deflecting a little. So I went a head and put in a cleaning cartridge and drew the cleaning solution through the blue/black print head with a syringe. I...

I purchased a desktop printer from Signwarehouse, back in 2014 . Well it now has a blinking yellow light and will not print. I called SW and they no longer deal with that printer. They referred me to Direct Color Systems in Connecticut. I have gotten no where with them. Spoke to them, but...

Had this problem at beginning of the year temp to low, I changed print head cables as someone suggested and it went away until this week. maybe 8/9 months, even in sleep mode it will turn on and show temp to low and once in the middle of print, thats what it did before. should I turn heater...

Hi peoples. I used to print transfers on Siser material with HP Photorealistic-LowTemperature Substrate setting on my old HP L25500. Now, on the 330 it seams that that preset/profile is gone. I was wandering what everyone else is using for transfer print. I tried Generic paper and lowered the...

This is what my nozzle check looks like notice the blue and black nozzles stay on: Things swapped out or checked: 1. The print head has been verified to not be clogged. I manually applied (using syringe) and verified that cleaning fluid was making it all the way through the head. 2. The...

Usually I leave .15in margin on my cuts and that has helped with the uneven cuts, but now my cutter is cutting way off. It cuts right into my prints! This machine is so frustrating to use. Anyone have any idea how I fix this? I've done other cuts at .25in and it still cuts into the print.

Does anyone know what this problem might be, I'm refilling my JV3 with ink and only my cyan, lt cyan and yellow is coming out on the test print. I tried drawing ink from the back of the printer and from the damper still can't get it to fill the dampers, even on new dampers.

Which machine will print on chrome film, outdoor durability. Or even with a laminate???

Greetings all! It's been a while! I have recently been asked to help set up a print shop. Ricoh printers will be the primary printers used. What I am specifically tasked to do is find the proper kind of software to "run" the retail element. Software that can calculate costs, provide...

I need a print head for Roland PC60. Any vendors? I have a Roland PC60 and need a new print head. Any ideas where in Europe I can purchase a reasonably priced print head? Thanks,

Hello, Can anyone help me? I have a Mutoh Spitfire Extreme 100. In I print 4 squares CMYK the printer prints colors ok, but if I want to print a image printer print another colors. ex green on the file becomes red on the print. Thank You

Apart from looking at soft proofs with the granger rainbow and other images, and also printing them off and comparing them to your monitor. Is there a way you can print a set of patches, measure them and put them against a reference set and see how accurate they are? I suppose similar to when...

If it's not one thing it's another. I've been playing with settings and profiles to dial in my colors. I finally got all that pretty close, and ran a long print on reflective (7' long). At the last 8-12" of the print the black began dropping out and you can see banding. It seems like I read...