printhead

I had a tech come on Friday because I was getting bad banding and black heads not firing. He replaced the head a and the nozzle check looks bad and it still prints terrible.Looks like my optimizer channel is not functional too. He’s coming back on Monday but I’m afraid he may not know what he’s...

hi! I just got a problem with my Mimaki UCJV 300-160. Head 1 is missing the complete CYAN channel. 5–6-time cleaning + 2 sessions of Ink Fill-up and it is not coming back :(. Did any of you had a case like this? is there anything that can be done??

Hello, I have had some issues with my HP FB750 printer for some time. I have tried manually calibrating the printer or doing the automatic calibrations and cannot get better results. After talking with HP support, they recommend that I replace the printheads. The repair cost for the labor seems...

I was trying to print out a past job and noticed that my blues were not clost to what I had before. I figured out that it was because an entire nozzle isnt working for cyan on print head 2. Any idea how this can be fixed without replacing the nozzle. Ive done a manual cleaning and several head...

Hello, I am going to be replacing the Black / Cyan printhead on my SP 300i. I have the printhead and bought a service manual, read several times and searched videos. I think I am going to be ok, just have one question for the community. In the service manual it states after install go into...

just wondered if anyone had ever risked it and if so how did it hold up?

Hi folks, I try to help everyone on here as much as I can and I consider myself pretty knowledgeable when it comes to Roland Printers. However, now I have a bit of a dilemma myself and am hoping for those with more knowledge then I, might have some insight for me. I think I know what the issue...

We have used a Gerber Edge in our business for decades, but the process for replacing the print head when a pixel goes out is just too cumbersome and expensive. We have an FX now, but we have had 1s and several 2's through the years. We use the Edge mainly to print white on color vinyl. We...

I purchased a DX2 printhead for my Roland VP-540 less than a month ago and prints streaking horizontal lines across the media for one of the colors (the black printhead). I have attached a picture showing the streaking horizontal lines that happen during printing. I also replaced the head cables...

My 1324 will barely print anything at all. I removed the dampers and CMY have 2 colors in them, and K is solid black. K also prints the best. But I am using a lot of C&Y to print some custom Ukrainian flag designs. Is that a problem with the dampers? If so, is that all I need to replace? Does...

Hi guys, I want to ask if sparepart between those two printers are the same? I have Fujifilm Acuity EY and my fuji rep charged me 7000usd for each printhead. I am just wondering if the price is reasonable or not. This is the part number FCE3010108132 KIT-F/S PRINTHEAD CA4 If you sell one of...

Hey so I've has the 800W for a few months now. I gotta say that I'm not sure how much I really like this thing. I had a L570 that we replaced with the 800W and at first i thought it was a nie upgrade but I have been getting crashes at almost 5x the rate and I absolutely have the new take up...

Hi Everyone - Just wanted peoples thoughts on the below please. We have a Mimaki TS500-1800A, and when we start the machine in the morning a lot of nozzles are missing. So we perform a clean and all the nozzles come back to life and a test print shows them all working and firing. However, as...

Hello all! Was just wondering if anyone knows if it's possible to repair print heads? We have a print head (M007947) with a broken wall between one of the black and yellow channels. We've replaced it and I'm a little reluctant to just throw it away if a company somewhere in the world can repair...

Hello Hopefully someone can help me. I bought a Sp-300v from ebay that sat in a wearhouse for a year. I preformed a 48 headsoak on the printhead which were completely clogged and got the solvent fluid to run freely through the head. Now when i try to test print the printer goes through the...

I need a printhead for a Mimaki JV33-130. Prices online range from $765.00 to a bit over $2,000, which is a huge difference. Most sites list the printheads for $2,000 +(-). Is there a difference between the mid seven hundred dollar heads, and those that sell for two grand? Here's the link to...

We have a Gerber Edge FX with a printhead pixel starting to go out. We have had this problem with an Edge, Edge II and with the Edge FX about 3-4 times in the past 12 years and I have always been able to avoid the absurd (to me at least) process and expense for buying one from Gerber. Between...

The lm printhead on our HP FB750 printer has shot an error message for several months now, saying that the "printhead warmer is too warm" or "printhead warmer failed." I knew this would eventually lead to total printhead failure, and now since we're at that point.. does anyone have any advice...

So this past weekend had a bit of vinyl printing and must have missed the heat settings, got some tunneling and noticed a few head strikes when I came back to the machine. Looks like it hit in about 4 different spots at different times. So I ran a nozzle check and sure enough there is about 4 to...

Hi Team, I own an Epson S40600 for about 2.5 years. I needed to change the printhead. Bought a new printhead, downloaded the service manual and service software to make the repair myself. I researched the procedure and followed all the instructions. After changing the printhead, when I turned...