printhead

Hi! I have 2 heads that i think might need replacing, can anyone point me in the right direction? might be something else then new heads i need? I have changed the dampers and cap tops on all 6 heads. Any ideas? it is head 1 and 6 that have trouble, the rest print fine. ( i know yellow is...

Hi! I've just changed printer heads and all is good, but now I need help with BIAS adjustment, etc. I have a service manual for a SP300, but it's a bit different to the SP540i. Anyone have a PDF link, please? Thanks, Ian

I soaked the DX5 in my Mimaki JV33-160 and now it does not print anything. No error codes nothing. I am suspecting it was a dye sub aqueous water based print head and by soaking it in solvent ruined it. ( yes / No opinions? ) So I'm hoping someone has a used head that I can test with, even...

Hi, So I have a quick question about the DX5 vs the DX6 epson printheads. Am I missing something or is the Max Resolution of the VS series 1440 x 720 dpi whereas something like the CJV30 can do 1440 x 1440 dpi I thought that the DX6 printheads were a step up.

Hello, My Mimaki CJV30-60 was left sitting idle for a whole year. The nozzles were working perfectly before then. So I recently changed the dampers, tubes and capping station. I also gave the printhead an overnight soak. I went into options and selected Ink Fill Up. Still nothing was coming...

Hi All, so I am new in print & cut and looking to get used Roland XR-640. Just got test print and history report from Roland that I might be buying, all attached. There are few questions that I would like to ask a more experienced people as most of you are: - This machine runs on 2 x DX7...

Hello everyone, I have recently taken on the task of operating a Valuejet 1324 for my employer. Problem is I am not certain of how it's been maintained. So let me try to get it clear for all who can help.... Recently had 1 channel of each color drop out. I have a good deal at the capping...

Hi Guys really need some help on my Roland XC-540 it has been offline for around 2 months now. The CYAN & Magenta is not firing at all I changed the fuse and it has blown almost instantly when I put it in and turned it on. Luckily I have a spare fuse however thinking there is no point putting...

Hi I'm searching print head Xaar 126/35 For printer Infiniti fina 320b, where l can buy? Plz help

Hi I am searching for buy Xaar 126/35 pl print head for Infiniti 320b where I can buy?

Print head will not print yellow on test draw nor will it pump yellow. Moved the yellow damper to another print head and it filled the damper perfectly. Moved it back and nothing. The cyan pumps and prints during the test draw. I'm trying to determine if the print head is bad. If so do I need to...

I am looking for Mutoh 1324 printhead(s) I picked up a couple printers that had sat for a while, both function other than almost no ink at all coming from one, and only cyan and black working from the other with a hint of magenta and yellow. Ive tried cleaning, and its time to just buy a new...

Help! I am having trouble with my printer. The light cyan is not showing up at all. There are two print heads on this printer and all other colours are showing up great. The light cyan is from printhead B, yet the black, yellow, magenta, light magenta all work fine. The light cyan is completely...

Hey guys! I'm a new member of this forum, i have seen you post a lot helpful comments and great ideas of how to fix roland printers. The case is that i my XC-540 has started printing blurry. Printhead seems to be in a great shape excepted for the yellow one which has some reflected nozzles. When...

So I have an old printhead that got replaced for my cjv30-160, does anyone know of a place that would refurbish it?

hello my friends i know this is an old thread, but i have the same problem with my vj 1204, check the image, i buy a new print head whit a flat cables new and one kit of maintenance, i try print but E074 err Current Cr and the carriage stop in the middle of the printer, and later of reset the...

I've basically abandoned my DX5 based Mimaki JV33 for some time. The DX5 head was super clogged, the test print was mangled all over the place. There's even a visible "scratch" across the head. So I figure, what the heck, I'll pull the head off the machine and clean it real good. Using a fresh...

Hey guys and gals, anyone experience ink flood when the change head and fill ink? Its leaking somewhere behind pumps, trays full of black, what stayed behind as it leaked out the holes in case...where to begin looking???? Did I possibly "blowout" a line oor seal while I was clearing ink line...

A couple months ago I started losing black nozzles on my printer after a few head soaks and cleanings it was back to normal. It worked great for one print then just started dropping nozzles like crazy immediately afterwards. Ended up replacing the capping station, printhead, dampers and print...

After picking up a sc500 recently for a deal , (yes I know they are very old and have read most peoples opinions of the machine, but it is what it is, I run a small business from home). The previous owner replaced almost every consumable component except for the print heads, after setting up the...