Search results

We actually printed the bottom white with a 3 inch bleed and then the top green with a 3 inch bleed and they over lap in the body line. would have been close to impossible to get the line to the right arc to follow body line with out getting a head ache and alot of stretching. we might have used...

Here is a cruiser we just got out of our shop. it is for a new gas station that offers deli max, texos tacos, and broasted chicken.

cmykx2 i took a syringe and pulled cyan out at the pump. i tryed with an eye dropper putting cleaning fluid in the capping station and all 4 spots the fluid runs right through. and about a year ago we ran out of ink and to keep head wet we put cleaner in the capping station capped head and turn...

I just switched the yellow and cyan around and printed 100% cyan and 100% yellow, for about 12 ft with yellow (cyan head) just missing alittle, then did a heading cleaning and now test print is fine. any thoughts

Is it bad to run yellow through the cyan head and cyan through the yellow?

Having problems with our 04 mimaki jv3 130 sp2. running lyson 1300 series ink. we have been prining close to a kelly green, part way through, it got more of a lime green. So we realized 1 cyan quit. we cleaned every thing and tryed again, fine for a few feet same thing. I replaced 1 damper and...

Dead on. thanks much.

i need to know what Elkhorn and northland adventures is. they seem to be the same. what the font won't work since they are welded.

looks good. nice work

i have removed 2 wraps so far. both oracal. 1 was a full size f-250 extended cab, long box. put it in a heated shop for 4 hours in middle of winter cam after lunch was all of no adhesive in 3.5 hours. then removed a full wrapped forester, outside on a 80 degree day in about 6 hours.

I am on my 3rd vehicle that i have painted flat black. Right now i am driving a 06 subaru forester all flat black, even the rims i did in flat black. i used a SEM Trim Black. not the cheap chalky looking flat black. no maintenence needed.

No actual pictures, but here is the design we have done on roughly 3-45 cars in last 6 years. your design made me think of ours because of the graphic stripe

looks very good nice work.

We are going to a business expo in couple weeks. Looking for any ideas for a display. Has anyone had a contest give away when they have been at the expo. If so feed back would be appreciated.:thumb:

i would try a profile that you would use for a pos pro material, rough the same material. We have the same pop up material and i just used our pos pro settings.

LOL thanks needed a good laugh. Ya we tryed the 3628 on our own wall and fell off with in a few hours.

where??

brushed script? No Image attached

Left Frank 2 voice mails. no reply back. we have talked to 2 or 3 oracal reps and about 8 at Fellers.

Ya it seems weird that they would recommend 3 products all that fail. Also Oracal got all the lot numbers from me to keep records of the problem.