Search results

Get yourself a set of wad punches

Hold a sign above your head and get someone to take a photo of you and the sign.. Post the picture on here and we will let you know if it is or isn't

Wireframe the vector and you will find it is made up of pieces..

If the sealing surface is still soft, it will be ok. If not they are only about $30 to replace.

Do this test to verify your printer is printing the correct colors with no bands...I think you will find it is the vector file that is the problem

Just change to any other profile and see if the tinge is still there for a test..The profile provided may have a glitch or not setup properly

What dpi are you printing and have you performed a printhead alignment? What does a print look like if printed at 720x720 or 720x1400 and what program are you using for your prints? If you have versaworks, do a quick test print and see if there are any lines..

RLURDL then LDR and Power On within 5 seconds

No.. they are a different size for a reason. each pass creates a slight vacuum that replenishes your inks when the head stops firing. dual channel heads can use small dampers but it is recommended to use large. If you are throwing solid colors, big dampers are better

They are holding again tomorrow for those women who didnt get their make up on or choose a dress and favorite shoes in time.

Been doing it for years with one of those bleeders, and as stated, change the lines to silicon as the originals cant handle solvent inks or cleaner.

I'm not sure you understand what roll the pinch rollers play..Maximum width is determined by the placement of your pinch rollers and the position you place your media on the machine.

Test prints look fine..Are the prints visually showing the misalignment or only under the scope of magnifying lense?? Do a print at 720x720 and then one at 1400x1400 and see if there is a difference in the alignment on edges?

Just do a standard test of all colors and see if any are slightly firing out of line..

Number 3 dip..not 7;)

What does a test print for your magenta and cyan show??

Either cross contamination or you put too much pressure on a syringe doing a manual clean..Possibly killed a head.

" 75 squre ft dealingr."

Pick any profile that suits your needs..or edit the profile to suit etc. YOU TELL YOUR PRINTER HOW MUCH INK TO LAY DOWN!! it doesn't tell you