Search results

I have not forgotten about you Brian, we are just in our very busy time and I hate to have the printers down during this time. I will look more into the pressure adjustments. My sister who operates the machines, says she has made adjustments in the past when a message comes up. Will we always...

Thank you for the information, this is very helpful. Actually our signs are more novelty than anything and we clearly mention they do not meet MOT/DOT standards and we recommend them for indoor use only. But our customer base is growing and we would like to not turn away all the official DOT...

Hello, we have 3 JFX200 flatbeds and two of them are about 2 years and 6 months old. One of those is presenting a perfect test draw but we are having issues with banding/ lines. Mostly when we print green colors. My question is, why would a printer with a perfect test draw all of the sudden...

Hello, I am new to roll to roll as we only have 3 UV flatbed mimaki printers. We were printing onto reflective material on the flatbeds and as expected the life is shorter than we would like and I was just curious if someone could recommend a good latex printer that would qualify for the 3M™...

Hi Jim, would love to talk do you have time to talk on the phone?

Hi Jim, I am interested, how much is Onyx?

iPrintStuff Thank you for responding and please forgive me but not as up to speed with the lingo as I should be. We use rasterlink 6+ on two printers and 6 on another. What is meant by spectrophotometer and what process? Sorry

Yes we are looking for someone that can color match 3-JFX200 together. We paid someone recently to make the color matches but in the end they are not putting down the proper colors. Do any of you have someone that you've worked with in the past that might be able to help?

Hello, we have a new printer installed and i dont feel the wiper height is correct and need to access the #adjust menu, can someone tell me how?

So we had to replace a couple heads on our jf 1631. We replaced #2 turned on the machine everything was fine, then I replaced #4 and turned it back on and we got a error 108 hd thermos 7. So I replaced the fpc to print head 7 and then we got the error 108 connect 7 message. We don't even use...

Any help on this would be appreciated? Why would the head keep going beyond the rubber caps after a print job and not just land over the rubber caps?

got the alignment dial in but now the head assembly goes beyond its normal stopping point and causes media jam after every print. I just cleaned the encoder strip and no luck Any thoughts would be appreciated

Hey everyone. Seeking some guidance on a new issue this morning with our JF1631. We recently replaced the y axis motor and are having some issues with alignment on the cap and wiper. I do have the plastic cap alignment tool but the issue I am dealing with is I cannot get the head to align to...

May need to have a print head replaced.

Looking for mimaki tech in the midwest to service jfx200

Everything is exactly the same. I am at a loss. Cannot figure this out. It seems like it must be a random update because both printers were printing the same file correctly. I did notice one computer rasterlink version is 5.16 and the one with the issue is version 5.15. So i will try an...

That was my first thought but not sure how to see if both rasterlinks are the same version

I am not sure can you advise as to where i might find that setting Solventinkjet?

The printers are in two areas of the shop and would prefer to print any job we have on any of our printers rather than picking a choosing.

We have two fairly new mimaki jfx200 2531 and run rasterlink 6 on both and all of the sudden one of them is not printing a gradient the correct or normal way. I have attached images and seeking some help. Bear in ming these are the exact same files and both printers are ran with independent...