Search results

Thanks everybody for the replies! I appreciate it! I went and checked out the light poles and they aren't as beefy as I thought. They are more thinner low profile with small arms hanging off the top with LED's lighting. They are in a private parking lot for a distribution center. A 4' x 4' sign...

I have a 4' x 4' aluminum panel sign I need to mount on a parking lot light pole for a distribution center. It's most likely going to be several signs when it's all said and done, but I need to get the first one up there to see how it's going to work out. I have a couple questions I was hoping I...

Thank you! This sounds like it might be the ticket.

They need to apply to the back side of the banner though and stick to the display case. They can't show on the front side. It looks like all the bannerups clasp around the edges, which means the clear plastic piece will be seen on the front unless they have something I'm missing?

Hello everybody, Please reference the attached image. I need to mount a 118" x 195" 13oz banner with welded hems only around the outer edge of this display case. It only needs to last 6-8 weeks, but I don't want it falling down either. It needs double sided adhesive tabs on the back side around...

Yes, it's good. I have one and it takes the guesswork out of slicing door jambs and trying to find the center. It also comes with 3 different size discs that you can swap out depending on the gap size in a nice case with a foam insert. Could I live without the nice case and just toss the tool...

Wrisco

Ok I will look into it. Thank you!

A couple thousand of each design every other month I'm told.

Hello everybody, Attached are two example images of a 24" x 20" offset printed, clear polyester decal that needs to stick only a day or two to vehicle floor mat carpet. The backing paper has a crack and peel feature on one side so it's quick and easy to remove backing paper. Can anybody...

Can’t you just save it as pdf in Illustrator then import it in Signlab? That’s always worked for me.

I’m running a L360 with Onyx Thrive and don’t have any issues with grainy prints.

I have a couple of these and they are the best! Ultimate Steel Safety Ruler SpeedPress Sign Supply

Will do Josh! Thank you

Can anybody recommend a good fabric for the HP Latex 360? Preferably for use for SEG display frames that are LED lit and non-lit. Also, if you can recommend a good backer for LED lit so the colors are bright and consistent that would be wonderful. Thanks in advance!

How do you form the pan? I understand you bend all corners with a sheet metal break, but how do you make it seamless without slits in the corners once all the corners are bent? Do you weld them and sand them smooth? Also, how would you accomplish the pan for something like the attached image...

I don’t remember the name, but I had this one and don’t recommend it for cutting sign material. It’s not very “heavy duty”. The four tracks are soft, lightweight aluminum and they eventually get loose and unaligned at the joints with frequent use resulting in a wavy or jagged cut. There is just...

Whatever names you think of, go directly to google to see if there is anything similar that would get confused with your business. If there is, scratch that name off your list and go back to brainstorming. Then go to Godaddy to make sure the .com is available. If it isn’t, scratch that name off...

I bought a nice Seal Base 54 from the get go and it has served me well for almost 8-9 years or so? However, it did have quite the learning curve (like all laminators do) and I ruined a bunch of prints til I learned how to set up the rolls of laminate and operate it. If that thing did weight so...

Stouse is a no go... they just said they can’t digitally print and number a destructible face adhesive decal.