Search results

Yes there is a way to calibrate the foil placement - check your help section in your software. it involves printing a small sample, and then it asks you which direction you would like to move the registration for each color. check under foil registration adjustment in your software manual. I...

and congrats on your growth of your business!

You know, you can lease one of those office suites for a few hundred bucks a month - I think you run the gerber edges, so you don't need special power requirements, etc. If you are in LA, here is an example: https://losangeles.craigslist.org/sfv/off/d/affordable-private-office/6736461485.html

sorry - the FX may not have this board. Do you only have one board in the unit?

Hello - so your Printhead voltage for 1317 Ohms head should be 22.1Volts. You can check this at the leads on the top closer to the printhead, or off the back of the power supply.

check your comm settings on device manager also- make sure they match flexi, etc. make sure the conversion cable shows up properly in device manager,etc.

It sounds like the issue is your communication cord. You have a few options 1. The easiest connection is the older style wide parrallel cord.- if your computer has this port. note: not all parellel cords will work. I have had mixed success. 2. If you are using USB / conversion Parallel, then...

With the consistent spacing, its tempting to say its a print head cable...So I would re-seat the cables inside the machine. - both on the 2-axis board and the CPU board. also check the voltage to the head- off the back of the power supply. - let me know the Ohms rating on the head, and I can...

definitely node editing. find to tool and go from point to point to make them sharper.

welcome!

Here you go- see attached. I would say CB15U

Thank you everyone for your input. - appreciated.

Just curious - Anyone use Process Pro Black Instead of Black? Wondering if its just as durable, opaque etc,.

I hand mentioned the wood clamp, but it required removing the upper cover. The bar clamp is narrow enough that you dont have to do that - very nice.

You say inexpensive is important. Is paint and some masking tape an option?

Clean your metal rails very well and re lubricate them with 3in 1

welcome!!

Saw this just now So funny

Are you serious about the rental property sign?

welcome! use the search tool - there is a ton of information here, and chances are your issue has been covered and addressed by others.