Search results

Which Liquid Laminate do you use on Eco-Sol printed banners for long term UV protection (satin finish)? I was using Drytac EnduraCoat Transit - Liquid Coating for Outdoor & Fleet Graphics (1 Gallon), but I am having problems finding it. Like it has been discontinued. Thanks for any suggestions

Rear window perf on pick up truck- laminated or unlaminated, what do you do? I see a lot of them really cheap on eBay and Amazon and they don't say laminated. I attended a Justin Pate vehicle wrap class back in 2010, and Justin recommended laminating window perf so rain droplets don't collect...

I have a Roland SP540V running VersaWorks 5.3.2 on a Windows 7 computer which is not being supported by Microsoft any longer and I want to upgrade to a Windows 10 computer, does anyone know if the VersaWorks 5.3.2 will work on Windows 10? How hard is this going to be to switch over to the new...

Are there any Omniprint Freejet 330TX Plus DTG users on here?

I have a new (it was sealed) Roland Eco-Sol Max Ink cartridge Cyan the is not recognized when I install the cartridge in the printer, I tried cleaning the contacts on the chip but it will still not be recognized by the printer. Do you think if I remove the link from this bad cartridge and add...

Hey, I was printing a job on a cut sheet 20" x 36" and although the printer printed the complete image as it was advancing the media to print the two rear cut marks, the printer stopped and is ging an error: Sheet Set Error - Set Again. I guess this happened because the sheet was not long...

What is the typical price for a 48" x 96" digital print mounted to a customer furnished MDO signboard? How much extra to laminate the graphic before mounting to the signboard? Thanks

Does anyone know this font? Thanks

Does anyone have the Jeep 2019 Wrangler JLU (4 door) template, or know where I can purchase a good quality outline template? Thanks

Does anyone know this font? The "5" has a unique tail. Thanks for any help or suggestions

I am having problems with the PRINT CUT MARKS on my Roland SP540V printer. The front right PRINT CUT MARK is printing with lots of banding the other mark on the left only has a few lines in it. What is causing this? Any ideas? The print looks ok.

Can anyone open a DWG file for me and convert it to a vector drawing (eps)? I tried to use a FREE online converter, but the downloaded file only opens as a bitmap file. The file is the vehicle outline template for the new 2019 Jeep Wrangler Jl. Let me know if you can help me out, thanks in...

I usually use 440 cartridges in my Roland SP540V printer, however, I have a new 220 cyan cartridge that will not get recognized when I install it in the printer. So I was thinking is it possible to suck the ink out of the cartridge with a syringe and add that ink into another cyan cartridge that...

What would cause these bad cuts on a Graphtec CE6000-60? When the cutter cuts around the sharp corners, it is lifting up the 751 vinyl. I have slowed the cutting down and it's still doing it. Has anybody seen this before and what did you do to correct it? Thanks in advance.

Is there a trick to make the CutContour show up when printing a gradient in a PDF with VersaWorks? When I load the file in VersWorks for my Roland SP540V, the CutContour does NOT show up. The gradient was made in Illustrator, how do you the CutContour show up and work? Do you have to do...

I have a brand new Roland EOM cyan Ink cartridge (220ml) and the printer would not recognize it. I tried cleaning the gold color contacts, but it still would NOT work. I inserted a different Cyan ink cartridge and it works fine. So, my question is, has anyone else dealt with this issue before...

Does anyone know how to set the Graphtec FC7000 back to the factory default settings? Thanks

Does anyone know a source for 1-inch grid template material to use for making templates? In the past, I remember to seeing some adhesive backed clear vinyl that had a grid pattern on it. I would like to place it on the side of a Jeep to mark the accurate locations for hinges and door handles...

I got a new Graphitec CE6000 cutter to replace my 18-year-old CE3000 and the new cutter will not work with the old Cutting Master 2 so installed Cutting Master 3.My question is when I send a job to the cutter that is 4 columns wide and 3 rows high, it only cuts the first row and then stops and...

What is the best Rtape clear choice to use with Oracal 651 (or any other brand)? In other words Hight Tac, Medium, or Low Tac Thanks