Search results

I'm sure this must be some sort of setting I am using Flexi and when I send to cut the cutter runs out and runs back in 1 metre of vinyl then performs the cut no problem at all, it is most frustrating when you have cuttings maybe 2 foot long which you can't use. On the machine I found a page...

Hi Everyone This is a weird one, well it is to me. In the past I have seen what happens when a head gets blocked and a fine white line is left in the prints, in fact used an edge for a few months and avoided that particular part of the head, my problem is I have a line in the...

We wish to use Flexi 10 on our VJ 1624 but I cannot find it listed in the the printers of flexi 10, but I read on a post here somewhere that it should be on flexi 10 am I doing something wrong or is there something I need to update.

Our 1604 valuejet was giving the pf current error, on investigation the encoder gear wheel was found to be cracked around it's fixing holes and the gear wheel was quite loose on the shaft, fiddling about with these screws would get it to work most times so a new encoder gear wheel and encoder...

We have a 1204 and a 1604 valuejet printers. We have been printing on pop up material but only the 1604 will print on it. When we try to print on pop up material with the 1204 it displays "media end" when the material is loaded. Is there a thickness setting we have missed. The two machines are...

This is both the problem and how we fixed it in case it's of use to anyone else. We have a VJ 1204 and use a bulk ink system normally works well but I must admit I hate the chip system, anyway I digress back to the problem, we were getting the error (cymk) not original and sometimes just (k) not...

Hi Folks I operate an edge and use an old GS15 plus cutter in conjuction with it, I am having a small alignment problem, if I print and cut for example small circular stickers approx 1 inch diameter and can get 10 stickers in the width this is what happens on one row, the first circle cut will...

I live and work in Northern Ireland and among other things use an edge and have a GS15plus linked to it. We also have a couple of super sprints, recently the GS15plus lost teeth on the Theta belt so I have been trying to source a new belt. Does anyone know of anywhere in the UK that may still...

I have a GS15 plus cutter which I use in conjuction with an edge, recently the Theta belt lost some of its teeth and whilst I am waiting for a new one I have pulled off the shelf, one of my old super sprints with keyboard, and I am using that, a great cutter it is too, what I have noticed is...

Hi We have a GS 15 plus which we use along with a gerber Edge, I am using composer. Everything works well and I am quite used to the set-up. I have read that the gerber can do a die cut i.e cut through both vinyl and backing paper but have never had the need to do this. The other day I was doing...

Hi We have a Uniform Lancer Printer and a CE5000-120 plotter, using Wasatch softrip software, all of this was a package sold together. Both work fine but the problem we have is cutting a print to the registration marks. The plotter sometimes picks up the registration marks and cuts away quite...

Can anyone give me some advice, our edge is leaving random lines, the foils are wrinkling, I have tried lowering the setting in print options to lighter from normal this worked for a while but now it is happening again, sometimes the foil is holed right through, the dancer bars are fine and the...

We bought a factory reconditioned Edge after our old original edge head messed up, it leaves one fine line about 11.5 cm up but is fine for lots of sticker work at worst we dump that row. Anyway the old one worked with a super sprint cutter and all works well on Windows ME. The reconditioned one...

I have a fasttrack 650 which isn't working and have decided to have a look at it, on the Hitron HV121604-C some of the resistors have burnt and one of the diodes had a dead short it looks like water ingress had caused the problem, I have access to all resisitor and the diode and can change them...

Here is a question for all the old hands who remember the super sprint 15inch plotters that came with its own computer and plug in fonts etc. A package was available to use the plotter from a computer instead of its own computer programme it came with a card called an LMK module and when...

I work in a sign shop called sign-it in Coleraine in N.Ireland we make signs of all kinds we have uniform printers, a couple of gerber edges, three of graphtec plotters, a tekcell router and a large worksop with an assortment of folders and guilotines etc. Please to be a member of the forum and...