Search results

Hi, long story short , After re-installing the Wasatch software , I installed the configuration files which I had saved from before the install. Everything seems to look OK, in the dialog box, ink percentages etc. However, the prints are much darker than before even though I am using the exact...

Hello, We have an older roll of heat press T-shirt material that I need information for - Evols Evolution Print semi finished. I can't find any information online about it, ink compatibility ( Eco-Sol max ) heating times and type of premask etc. I was wondering if anyone has used this material...

Hi, I know this topic has been discussed before but after a quick search I couldn't find it. My problem is using Flexi 10 and Versaworks is that the Contour Cutline is printing out in Versaworks ( 5.0), every once in awhile I run into this and usually bring the cut-line in a bit to get rid of...

I use a couple of Roland Pro2s, a Print and Cut SJ545ex and a print only SJ645. We are in the process of upgrading our printers. So, the first question is if we were to purchase an Roland XF-640 printer can we use an offline cutter with it somehow? Or do you have to use the XR640. If it is...

Hi, I was wondering if anyone has run into this problem with this printer or a similar type printer. What happens is the magenta head will start outputting a colour that looks purplish as if it is being contaminated by cyan ink. I have bled the sub-ink pumps and there never seems to be any...

As a fledgling Graphic Designer, Large Format digital print guy, photographer and general lover of Art, I must say that you people, the sign painters are the true artists of this trade. I know most of you already know that but I just wanted say it out loud. I was wondering if anyone has seen...

Hi, I need some help with this problem. I get banding fairly often and don't know the cause. The banding it not banding due to improper feed adjustment; I wouldn't think. When this problem is not occurring the prints look perfect. If I print on a normal shutter setting the banding looks like...

I had seen this problem posted before but couldn't find it in a quick search. Cutting a .PSD file in Flexi ( no stoke , transparent background ) using contour cut command, exporting as an .EPS , importing into Versaworks , print and lcut. The contour cut line is printing out ( very faint ). I...

I was thinking about experimenting with printing to ceramic tile with our Agfa M4f and am asking for advice. If anyone does this type of printing with a UV printer, do you use some kind of sealant post printing? I don't intend for the product to used on the floor but would expect that I would...

Hi, I need some help please. Awhile ago someone posted a method of bringing in a PDF file with missing fonts into Illustrator, where you could convert them to outlines (intact). I forget how. Thanks, Tim

I was wondering if anybody has tried or does lenticular printing. Is it possible / feasible with a large format ( Roland SJ 640 ) using ecosol-max inks? I know it can be done with UV curable type printing, which I don't have access to. I was thinking with the possibilities of Photoshop CS-4...

Check it out! http://www.youtube.com/watch?feature=player_embedded&v=aFFFiB_if18#at=21

Hi, This is a personal project. A family is ordering a gravestone which will have an etched image of mine in the background. I am laying out the design as well. What I'm wondering is what type of file is used for this, does it need to be all vector based, bitmap or combination ( pdf / eps ) in...

Hi, When mounting a poster or other material that has no adhesive we use a double sided laminate material ( Artic Blue something? ). I usually apply it to the board (cold roll lamination ) first and then apply the poster , mounting the paper similar to how you'd apply a laminate. The only...

Hi, We recently upgraded to Flexi10.0.2, from version 7.6. In the past files were adjusted via Linearization, ( density adjustment and ink limit settings ). I don't see where I can re-create those settings in Flexi 10. Can anyone help me with this? Thanks, Tim.

I am considering putting some effort into learning more about motion graphics ( video especially ). I look at how digital displays keep gaining more and more market share; I was wondering if others considered this as well. I would think that it would be a good fit for a"sign" business anyways...

Hi, Without going into a long story, I am in a bind. I have to install Versaworks and Flexi (7.6 ) for Roland SJ640ex 545ex on a different computer ( the old one and its raid drive are toast, when I use the Versaworks utility to indentify the IP address of the two printers, I briefly get an...

Hi Everyone, I just wanted to take a moment to say thanks to all the members who take the time to help other people with a problem or question. I can attest to the fact that you help many more people in the process. You can be sure that if someone is puzzled by something, there are others who...

I am a newbie to Flexi (7.6 ?) but I did look in the help files and didn't see a solution right off. I wanted to place a background colour behind a fairly complex contour cut ( that I also used to mask a bitmap). I do this in case the cut line is off a bit on a large print, so it won't show any...

Hi, I'm an old Newbie. After 25yrs working in a papermill, which shut down, I went back to school for two years and took Graphic Design. I was lucky enough to land a good job with a great company and have been in the industry for six months. I look forward to learning and perhaps participating...