• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

flexi 12

  1. Matching paint codes to CMYK Latex

    I need some help and not sure if this is possible. I have a customer that had an old airstream redone as a food truck. They gave me paint codes of an orange color to use that in their logo. Is there a way to transfer those codes to CMYK? I tried scouring here and google and couldn't figure it...
  2. Need Help HP Latex 570 & 360 Driver problem

    Hello, I run five HP latex printers, two of them are 360 and 365, the other three are 570s. I print long runs, 77-150ft at a time is typical. Starcraft Self-adhesive vinyl is the typical substrate, but only the 360s would print borderless due to the manual right-edge setting, and I only started...
  3. Question FlexiCut Starter Version 12 - Will it work with a Kona 1650?

    So, the title is the question! I do have the correct driver & installation technique for getting the Kona USB recognized correctly on Win 10, just need to know if FlexiCut Starter Version 12 will see/work with a Kona 1650. Thanks in advance for any replies!!
  4. Splices are incomplete

    Here is one that is probably has a simple solution but I cannot find any info anywhere. We are working on a job that requires us to splice the vinyl because the logo is too big. The file will splice but both pieces will be incomplete. I didn't have this issue before but this a new computer and...
  5. Question Adding My logo, QR code & phone number in Flexi

    I would like to print my logo, QR code and phone in the hem area on the banners we produce in flexi. Can you add some custom "mark" that you tell it the X & Y and it will come out in a place I want it?
  6. Question Flexi - Measurement Tool - Fractions?

    Hello guys, I suppose this isn't really a big deal, but has anybody found if there's a way for the measurement tool within Flexi (I'm using Flexi 12) to display its results in fraction form instead of decimal? I can't think of any reason why it would be deemed relevant to show something as...
  7. summa not comunnicating with flexi

    Hello everyone its been a long time since I was here, but Im really in deep trouble, We recently had to change our printer so we went for hp latex 330 very nice, yesterday we printed a bunch of work and decided to cut it next day but today alln the cut files dissapeared the print files are there...
  8. Need Help PLOTTING ISSUE FLEXI AND MIMAKI

    Hi All, I work for a traffic control company and make road work signs, so I only use my plotters for cutting. I currently am using FlexiSIGN 12 build 2324 and a Graphtec FC7000-160. However it is really old and doesn't cut all the way through on one spot anymore and have tried everything to fix...
  9. Need Help Flexi 12 HP Edition won't complete RIP (inconsistent)

    Hi guys, I'm running Flexi 12 Production Manager HP edition. After nesting multiple jobs and RIPing, it succeeds at times but other times it freezes (e.g. 90%) and fails to progress. After aborting the RIP -> un-nesting (separating the files), varying results occur: 1) I re-RIP the now...
  10. Need Help Coreldraw X8 to Flexi 12

    Is there a way to design in Coreldraw X8 and open in Flexi 12 to print? When I try to copy and paste my designs have jagged edges. Any help would be appreciated.
  11. Need Help Roland TruVis VG-540 Print / Cut Issues with FlexiSign & Print (Version 12)

    Recently bought this printer brand new about a month ago and we have it setup with the most current and up to date version of Flexi 12 but the print / cut alignment is off. The printer produces beautiful prints but has never print / contour cut correctly from day one with Flexi. The Tech...
  12. FlexiSignPro 12 Not Saving Registration Marks

    Hi all, just wondering if anyone can shed some light on this issue we're having with Flexi... We've been using FlexiSign Pro 12 for a few years now without any major issues. A few months ago, we noticed Flexi had required us to do a mandatory update, which we did. Immediately after the...
  13. Flexi-Pro is not working properly- PLEASE HELP

    I have been using flexi for years and upgraded to flexi pro - 12 - It has been working without kinks for 4 months after install... I didn't change settings- etc but all of a sudden not importing or exporting eps. I have to shut down the program as it just gets stuck in rotation of saving...
  14. Flexi Print "cannot Open Port" Error

    We switched internet providers recently and now our HP Latex 110 Is not communicating with Flexi Print. It keeps asking for an administrator to "setup TCP/IP" and every time we go to print it says " cannot open port". Any tech help would be greatly appreciated.
  15. Need Help Adding A Gradient To A Bitmap On Flexi

    Hello Flexi Users, I'm attempting to blend a bitmap image against a white background in Flexi. Does anyone have advice on how to either add a gradient, fade, or blend a bitmap. Thanks
  16. Need Help Flexi & Versaworks

    Hi I'm having an issue with my contour cutting on my overlapping tiles in both FLEXI and Versaworks, it's cutting everything but the actual side that overlaps? I'm not sure if I have something set the wrong way or what on the RIP settings or what does anyone have any idea what could be going on...
  17. Latex 330 and Flexi 12 printing previously saved versions of files?!

    Okay, so this is a *really* odd glitch I keep getting, and I have never experienced this before. I've been doing a run of gallery-wrapped canvases with 2'' mirrored edges. So my actual print size is 4'' larger than the original image. This will be important later. I put the images into Flexi...
  18. Flexi 12 borders for signs (think MUTCD)

    Hello. We recently installed Flexi 12, just did the one month subscription at this time to see if we can learn it. We are going from a very old version of Gerber Omega, so it is a lot to get used to. One thing we do a lot is borders on signs. We just got off the phone with tech support...
  19. need help with icc profiles roland cj 500 converted to eco

    hello, let me start off my saying I am a noob. I bought a roland cj 500 that was converted to eco-solvent from the previous owner. I pay monthly for flexiprint. I am using 20/20 color ink(recommended by the previous owner)the issue I am having is that all my prints come out darker then they...
  20. Feller's "Pop-Up" retractable banner profile for HP Designjet L25500

    Hi Guys - Here's a rather silly question but we have a rush job that needs to be printed on retractable banner material, but we just switched from a solvent printer to a latex printer and unfortunately bought the wrong roll from Feller's. Their 10 mil Pop-Up material is not latex compatible but...
Top