hp l25500

I refuse to give up on my printer. I really can't afford a new one at this time. I previously posted my issues with my print head. I figured it was my expired ink... Switched them all out for new. Since then, my pink colors are coming in vibrant. Zero complaints. I just can't catch a break with...

I'm a newbie to the printing world. I purchased an HP l25500 to give us a feel as to if we should commit to having a wide format printer. The machine works fine but for some reason I'm getting horizontal banding on my prints. I did a few print head cleanings, and it has helped but I think I...

So, I was printing along nicely and my belt shredded. It was a fairly quick and painless replacement, but now I error out. It initializes and then the head slowly moves across, no banging and comes back to the capping station. Then it zips out and throws an 86:01. When I installed the belt I put...

Hey all, I'm having a problem that I just can't seem to figure out. It randomly goes out of alignment and then prints fine. I have cleaned and oiled the carriage rails, cleaned the encoder strip, checked the belt and the gear drive for debris, ran a vacuum check, realigned the print heads and a...

Hi all, I'm new to the forum and just wanted to say hi and ask what everyone recommended for media on the HP L25500. I'm not new to printing, but I am new to latex. I haven't had a large demand for printed graphics so up until now I have done all of my signs and banners the old school way with...

Hi Folks, I've had two cyan/ltcyan heads spit the dummy in a couple of months - nothing appeared wrong, but the L25500 was convinced they were no good, so I changed them both. The printer was happy, but the 2 new C/LC heads were constantly printing bandings getting lighter. Head cleans and...

Hi Folks, after buying an HP L25500, (60"), the seller used Onyx as a rip and was keeping that for their next printer. Flexi was promoted as an affordable RIP for the HP L25500, but I cannot find any drivers in it, only one driver in Flexi for an L65500, which is extra narrow at about 1 metre...

This printer has been the best! I just replaced the drive belt and all pulleys and bearings as preventative maintenance and... I got a deal I couldn't pass up on a newer model. The old gal is still strong, has new heads and loves to work. $4,000! Email info@Signarama-woodbridgeva.com or call...

Hey guys.. I need some help. My L25500 has a couple of issues. 1: form feed and cut not working. Media advances but carriage does not move and cut media. 2: top right fan constantly runs after a print. If I reboot printer it does not run u til data sent to printer.

Hello, Running HP L25500 with onyx 10. I am having colour problems after recalibrating profiles using the recalibrate button in onyx 10. Using the built in eye on the machine. Sometimes the profiles recalibrate fine and sometime the results are very dark across the board. The medias I am...

Okay so for a couple of weeks my machine has been squeaking mostly when in backs up a substrate. This morning I oiled all the rollers and the print-head carriage. It is still making the noise. I think it may be coming from where the substrate roll is loaded. Does anyone know what I can do to...

I need a functional rip, preferably Onyx 7-10 or any RIP that can drive my L25500. I have ProfileMaker 5, so I don't have to have the ICC profiling module. Please PM me if you have something for sale.

Producing art work in Illustrator CS4 and or 5 Producing Reg Marks with the plug in Cutting Master 2 (Graphtec) Artwork sent to Onyx Rip Then to HP L25500 Trying to cut with my FC8000 Graphtec. It seems as though a lot of Graphtec users have this initial problem of the sensor not reading the...

Hi, I am looking at buying one of these two printers. Currently leaning towards the Mimaki. For anyone who has had the HP for a while, how well do the HP unlaminated prints on vinyl and flexi hold up to the sun? I am at the equator and I'm anxious about how well the prints will survive...

Hi, Been in this business for about 7 years now here in Nairobi, and had a Mimaki JV3 160 and a HP 5000, which were pretty solid printers. Don't have them now though, but I'm in the market for a new printer and have narrowed my options to either the Mimaki JV33 or the HP L25500 latex printers...