problem

Hi guys, I have a xr-640 roland 2013, single owner. My issue started when performing PerfCutContours, on the right half side of the sheet (Control Panel side) stickers where cutting at the right force. On the left side maybe 13" in some stickers where cut not with the same force. The problem...

While printing long job, material becomes crumpled under the rollers. Material - syntetic canvas (230-260 g/m2), 1.52 m width. Not at the start but may be at the roll half. And somewhere at the width center. Bumps appear on the material and then printing head begins th scratch it. Only stopping...

I'm looking for a replacement cap for the pressure bottle on our two latex HPs - HP L65500 and HP Lx800. Because of the high pressure, the bottle caps keep breaking. We tried several adhesives to fix them, but they keep breaking. The printers lose ink pressure while printing and it cancels the...

I am trying to print a black to white gradient design EXAMPLE by booktheif posted Oct 17, 2018 at 1:56 PMfor a job in Flexi 12. In order to get the output to look the way I needed it to, I had to take these steps : Rasterize Vector Change color mode to Grayscale After exporting this to...

Printed about 5 yards of 54" material (Avery 1105 vinyl). Went to load the next roll and now it's bunching up in the middle after it's been loaded and does its precheck. Everything was going fine with the first roll. Tried a new roll of material same thing. Have adjusted the feed roll so it's...

I've been having this issue for the last few days (since my system updated, which... I'm hoping isn't the issue because I'm not sure the last time this terminal was backed up as I'm still relatively new to this shop). We run an HP L26500 with Onyx 11 PosterShop. The RIP-Queue software began...

Hi Guys .... not much to find about the UJF-7151plus around here. We are using this machine besides the JFX500 for about two years now and experiencing quite some problems with the clear ink in the UJF, especially while printing on Polystyrene. After a few runs the clear ink head is always full...

Hello, I recently purchased the Mimaki CJV-30-60 primarily for T Shirt Vinyls and small stickers. I bought this exactly one month after buying the Roland SP540v which was my first ever printer/cutter. It was the first time I ever had any experience with a printer cutter combo. Now being very...

Hello I have a problem with my Mimaki jv150-160, when I print a background with a unique color (no images) it shows a white big lines with fade (waves) it happens only when I print I'm using caldera I tried many configuration but I can't find solution note that when I print a typical image with...

Hi everyone I have bought a WPR330 from a chinese UV printing company. I never thought about having this kind of stuff but printing on various items is kind of interesting so I wanted to try the product at the lowest price possible just to see the results. The printer is based on an Epson R330...

I am unable to install control center Ioline on windows 7 64 bit. The version that installs (full), does not list my cutter (Studio 8). Can someone help me. I did not find help in the Ioline site. I want to install the serial port.

Hey ! Yesterday when I had some free time, I thought that I would adjust the blade on my Mutoh SC-1300, I got the brilliant idea that I would reset the machine to factory settings. Now it does not work quite as it should. If I make a square in Illustrator that are 100mm x 100mm and send it to...

Hey guys, We're in a bit of a pickle down here in Kiwi land. Our Roland CX-500 is playing up (even though it's just been serviced) and refuses to stop rolling media backward. We can't seem to be able to interact with the control panel properly either, although the LCD screen lights up as per...

I'm sorry if my English is wrong, and I'm rookie about signs. In this week I'm buy HP Latex 310 and this week I'm only test, because I am little know and learning it. Media for test is Adhesive (White Gloss pvc,Clear Gloss pvc,PP Matte) Now, The problems faced is Magenta ink after print. if...

Hello All, I keep running into he same problem every day. I print on a Mimaki JV33-130 and plot on a Mimaki CG-130FX II. I use the program Wasatch to deal with all printing and plotting. The problem i'm running into is when plotting it will not stay on the accurate cutpath, but it will act as...

I have Flexi 11 SP6. I can RIP a PDF to a banner and 75% of the time it RIPs in 5 minutes or less (4x8) and prints out fine. The other 25% it takes a long time, sometimes over an hour, and prints super heavy - 300-400% across the entire print (hopefully I stop it in the first few inches). It...

Has anyone came across arlon dp 8000 with a waxy backing. I'm contour cutting this material and its a nightmare. The other material that is a nightmare to contour cut is the t shirt material. It is as if when the rollers change direction it slides momenTARILY and through time keeps throwing...

hiya, i have 1370 vinyl that tends to move slightly left and right. It's grand when printing though when contour cutting is an absolute nightmare. I've tried setting the pressure of each roller and all seem as should be. Any suggestions? Magnets to the machine to guide the paper straight??? Thanks

Hi It is the first time I post something here on the wonderful community. I'm running my business in Gothenburg Sweden and has not full control of the English language. I have a big problem with my Mimaki cjv30-130. I had two weeks of vacation, so the printer:-) but now when I'm printing ...

Greetings, I have a problem with my Mimaki JV33 .. 1 week ago thieves broke into my store and stole some air conditioning and moved the cable-I had my protector UPS to protect the machine, in the morning when I get to my shop, try turning the Mimaki and tried to turn but did not, just stay the...