problem

Hi! I recently bought an used Mimaki CJV30-100, i check every thing and all looks ok. But when i run the filling up option, the pump works but the inks don't fill up the lines. I already clean the nozzle, take apart the head and check if is clogged but no, the solvent runs freely. Please help...

Hi everyone and thanks in advance for taking the time to read this your help is greatly appreciated so here it goes.... Bought a 2nd hand machine was running great then had an issue with black head one side dried up the other was fine so I changed all the cap tops that needed changing changed...

I am using SignGo V.1.12 with a Desay Master XY 300 Cutter/Plotter. When doing cuts, it sometimes goes nuts. Example I had a cutout that was 5" x 60". First cut went perfect. The second cut went half way and then the roller stopped turning and the cutting head went straight across the vinyl...

Our Sc540 is printing weird all of a sudden. We were printing a pdf and eps file and the picture below is the result. The first 2 passes will be fine, then when the third pass hits, it goes off leaving a shadow effect that we don't want. Notice the side lines also. it was suppose to be straight...

Hi, My Roland RS-640 is printing strangely when file is containing a jpeg file in, even is tiff or pdf file that is printed. On the other plotter Roland VP-540 I don't have that problem, printed on the same profile. I cannot explane the problem so I've attached a photo. It's look like there is...

Hello, i have a problem with my printhead cyan, i have change my 2 cyan damper and always the same ! HELP ME !

We purchased a used Epson GS6000 a few months ago and have been relatively pleased with it. The print quality is very nice and it has been running error free for the most part. We have had issues with the auto take up reel which I hear isn't uncommon, but recently an alarming skew has been...

Hey Guys, I recently installed a vinyl graphic on a storefront wall. The wall was a metal sheet that was painted over. I cleaned the area then applied the graphic wet. The held for about 2 weeks, but now is starting to peel. Is there a way to save the graphic without pulling it all off and...

we have a Mutoh 1324 and Kona 1400, running Onyx 10.5 I'm running a 49" x 75" print on 54" Arlon cast 9 year wrap, with the matching gloss laminate, that is to be contour cut. FYI - I have run lots of this type of job in the past without problems on the Mactac Gruv9 and Razor laminate products...

Hi guys, i have a problem with my Roland FJ-52 solvent printer. I replaced the printheads(both)(epsondx2) ,flat cables (2x), pump, cap assy. I have configured the head rank number etc. After the replacement i wanted to print a test print. But i get only lines. I dont get it, what could be the...

Hello, I have been messing around with my New Mimaki JV33, and see these weird ovals on my prints. Only does it where the Cyan is right now, but for the life of me can't figure out where. Done some cleanings, but I'm new to this so maybe I'm missing something? Is it maybe the media...

Hi Guys we got a brand new JV34 5 Months ago, Recently it started printing half way then printing black with loads of thin colour lines!? I was shocked :banghead:, I mean the machine is still under warrenty but just wanted to know what the problem can be? PLEASE SEE IMAGE** Here are the...

So we have finally gotten past all our problems with our FC8000-160 except we can't figure this one out. We have tried a new blade, got a new cutting strip, tried different setting (messing with overcuts, tangent emulation, force, circle resolution), updated the firmware and cant find a...

Hi everyone, I have two printers, a Versacamm vp-540 and Versaart rs-640 connected to a simple pc. Versaworks have these 2 printers in the screen but when I go to print in the vp-540 the program close and can´t print anything. If you have any idea about my problem, please contact me. thank...

Hi friends I have been getting this error since last 3 days & now its beginning to get frustrating . I have read all about E071 in this forum & tried everything possible but it doesn't seem to resolve the problem. Heres in short what exactly happens in my case Details of problem...

Sometimes when I only cutting (not printing and cutting) the knife suddenly starts to make straight lines in every direction. For example yesterday I was cutting some letters, the first 2 letters were fine and then the knife started to make lines. I think that when media moves backward and...

Hi Guys, Having the 074 CR2 Current code keep coming up on my VJ 1614. I've gone through most of the topics and tried to follow some of the suggestions that others have been given. So far none of these have worked. When I move the carriage after it has crashed it is very hard to move in...

Hello, Our black head needed replaced and for about 2 weeks after replacing the head the printer worked great, (We put in the correct serial numbers). One day about 3 weeks ago it started banding straight black acrossed any material while at the same time print CMY normaly. first I tried letting...

Our Gerber HS15 suddenly started working incorrectly. It only cuts the first label and then quits. It seems to think it is finished with the job even though there is a page full of labels left to print. Has anyone run into this before? We thought maybe it was something weird in the job file...

I just bought a Mutoh Falcon Outdoor 48 at auction for next to nothing figuring that it would be worth a shot to try and resurrect it. It had been sitting for a couple of years and ink was left in the lines when stored. I purchased a refurbish kit from cmykparts.com and new ink. I have taken...