problem

I have a Roland Versa Camm SP300V, it used to work properly for 2 years, then all of a sudden I started to face this problem. I am having a cyan shade in everything I print, it also leaves a trace on the clamps. I thought that the problem was in the print-head, so I switched the data cables...

Hi guys! I'm a newbee here. I found this forum when i googled for the problem that i am dealing with right now. Long story short i'm working with a Mimaki cjv30-160 and yesterday i tried to print black text on a light blue vynil the problem is that text must be centered in cutted triangles...

It's been a while since I have posted- so hello, My name is Glenn and I am in Macclenny, FL just outside of Jacksonville. I was hoping someone has seen a nozzle check like the attached pattern and can give me some insight. I have soaked the head, completed 2 heavy cleanings and replaced my...

Problem is on Mimaki JV33 and with Cyan print head, http://www.mypicx.com/01232010/Mimaki_JV33_/ What is cautions for this? Help me, to solve this problem ! :help Thanks

Hello everybody! Cj500 have a printer that always worked very well in recent months she has been showing print marks in the opposite direction to the impression as if the heads prints colors separately in some areas of the media.'ve Done everything, changed media I changed the file extension...

I have a 540 was printing great. Then half way through the print, no K/C output. Fuse was blown on the main board. replaced the fuss. Bam blown agian(only when I preformed a test print). Replaced the head, head cables and fuse. Same thing again. Looked over the main board print and replaced the...

Hi all, I'm new here - found this place as one of the last likely to have people with Encad NovaJet knowledge, and I'm hoping someone can help me troubleshoot. . . My printer recently started having a couple of intermittent problems. Once in a while, it would unload (backward-feed) the...

Hey guys. I'm having trouble with the Graphtec. whenever I try to cut an image everything seems to get out of line. For example if I'm trying to cut the letters A B C D. A will be in one place and B will be almost a quarter inch lower then C will over lap D. At first I was using FlexiEXPERT...