Search results

Be careful with sending foam board products to California....it will be your client's responsibility to dispose after the show. Most venues will not take anything not recyclable. Look to falcon board or eagle cell.

yep...re-read...client was not charged for art, as long as they know that up-front, then they should absolutely pay for any art files. Or, you could get creative and allow them to pay you royalties on what boards eventually sell....

Maybe Im missing something here. If your customer paid you to create art for them, then yes they should get what they paid for. Now if you put art together because you where going to print them and did not charge them, than they should pay for the art.

I would run your printhead diagnostic plot to see if any heads need replaced. looks like black. Id start there...then it I'd look at trailing cable.

I'd go with an epson.

Jasmin, why eBay? just curious. You in NY. You have 4-5 resellers in the area. Most of them have technicians. Most of them have customers that want to sell their old equipment to buy new. You can get a used printer with a clean history. Give Damian at Piedmont Plastics a call...9086862200 they...

I was hoping to save some brain power. I am looking for a vector template to create a jig to print golf balls. Anyone have one that they can share?

you can connect via usb. you have to load the epson comm driver

Just an FYI, if you go to the service tab, you will find all of the printer's error codes.

Most manufactures can use a tilt and go to get a true flatbed through doorways. You can probably pick up a used hp latex for that price or close to it. Im always concerned buying a used uv cure printer because the heads are pretty pricey.

did you try calling summa?

you can purchase an eye1 through onyx...they will help you use it over the phone

Onyx true fit

Xrite Eye1 buy one and you can re-linearize all of your profiles. It's super easy, takes 5-10 of your time. It does help to start with a profile that matched your media as well.

...just recently serviced What did tech repair? How old is unit? looks like your curing module needs to be cleaned because pattern is vertical. What are the values of your profit, specifically ink density? Id try to run at 8/p 90 temps around 215-218 degrees

try powering off, unplug 220 from printer for 5 minutes...very important. remove both covers, after 5 minutes unplug and reseat purple lids cable at box and carriage pac 5x each side(a film can develop on these connections. unplugging/reseating cleans them off) put both covers back on. plug in...

when you lower the heat, you need to either increase pass mode and or reduce ink saturation.

hp part surfer has service manual pages for repair

Not sure who you heard of having to run them slower...we are printing Coro and foam board in 3 pass mode all day long. You should talk to a reseller, not sure where you are located. they can be purchased without r2r and white if necessary. Im sure if you tell them you are looking at a...

you need to select your customer after new estimate and then select a product