Search results

you'll be looking for something gantry related. possibly a cracking main ribbon that is distorting data at a certain bend point. move your zero to the left about a foot and see if the issue follows the main board or stays at the gantry. if the issue bumps over then it's not gantry related.

those heads clean up great with NMP, factory cleaner just doesn't cut it.

i actually had the dream shop a year ago in a partnership. 33,000 square feet, 16x20 vacuum former, 5x10 cnc, CET flatbed, the list goes on and on with six employees. but it was not a dream. if you've worked for yourself your whole life then give the reigns to a few people that think they've...

several acres just outside of queretaro, mexico. 10,000 square foot shop that is almost all garage doors all the way around. some specialty product line that is fun to do and a smoking hot woman to spend the days with.

ink mill makes great ink for the toshiba heads (i'd call them and ask about jf series) their company has shifted to non-direct sales on some products so it's best to just call them http://www.inkmillcorp.com/ also inkcups...

one of my favorite tools. specifically designed to refinish stainless grain. you can make your own scotchbrite donuts with a 45 degree seem, a piece of heavy duck cloth, and liquid nails. the tool has a bladder wheel and does stuff to metal that no other tool can do period...

there's not gravity "theory" about how the ink gets to the head. the head does have a micro pumping action in the piezo but that fires the ink that then pulls the ink train through it at the platen.

the cartridge can come in many designs. you can see in the clear refillables that they have "downhill" interior to keep ink feeding to one end. these printers are referred to as "gravity feed". think of the ink train as having a heavy and light side. if you were to hang a heavy chain off the...

the white ink is heavier and has more surface energy than the other colors. so while the cmyk is flowing down the tube and easily stretches under the gravity pulling it toward the head, the white is more resistant to stretch and is like a bungy cord and pulling itself back toward the...

i'd take the "recommended vacuum" settings with a grain of salt. we had tons of issues with our cet and after getting the canned tech response the fix was dropping the vacuum way below speck and cooking the ink in the offending head. my printer (flora h700) recommends 2.8. i run at 1.6. i...

3.4 is really high for white. perhaps your black will need to be lowered to thicken it up a tick(?).

are you dropping your vacuum pressure during white printing? also try setting your white ink heads at a much higher temperature.

one thing that helps flatten sheets for hybrid printers is to have the feed side running very slightly down hill into the printer. then have the exit side exiting very slightly down hill. between the pressure of the pinch roller and the rear table and the gravity pulling down a bit on the exit...

in Rasterlink, if you have the printer set up CMYKlmlc** you can use a CMYK only file and the printer will eliminate using the lm lc channel. you'll need heads there to shake hands with the firmware. they can be clogged but not error07.

entry level is $16,500 (LED UV dual dx5) and $28,500 (Ricoh gen4 @ five heads) https://www.youtube.com/watch?v=MeMJRlYE04I Actual OEM http://www.mtutech.com/

looks like a chinese build to me. you have two wise choices. limac or shopbot. there's other new builders out there but why someone starting out wouldn't just buy a used shopbot alpha is beyond me. http://www.talkshopbot.com/forum/showthread.php?t=20105...

if he did a cable swap and the machine went dead, he hooked the cable swap up wrong. the machine's board is not aware of a cable swap. essentially it's like a person putting a left shoe on their right foot and a right shoe on their left foot then having a aneurism. the printing all over the...

stands for cellulose acetate buty-something or other. a clear acrylic non-yellowing resin for cabinet work (sherwin williams CAB acrylic) i think it is in common Krylon clear spray cans... in the end, i really hated water slide. all of my tests just peeled off with ease weeks later.

pm me your email address. i have one that i drafted just for this purpose. unfortunately, the key is to have them sign in right after you get them their initial "look".

pm'd you a few days back. these videos are on a spare drive but i can look them up in a day or so. maybe upload them?