banner

SignSpring Gets Wet! Lind BannerFrame goes REALLY, REALLY BIG with a 40'x120' wallscape overlooking the Pacific Ocean in Guam. At 350 feet high and 4800 square feet, we believe this could be the world's largest Oceanfront wallscape! In under 2 hours, a four man crew and a swing stage...

We want to use fabric instead of normal curl-free film for our pop up banner stands. We have an HP 360 (Latex). Anyone have any suggestions (ideally stocked by Grimco)? Again, fabric not film or banner material. Thanks team!

This morning was running banners for a school and inside the banner material was this: It actually caught the head after it had printed in it a few times, stopped the machine and gave an error. I went and looked on the back side of the Mutoh and it's wound in the roll: I tried unrolling it...

I have a customer who has had vinyl banners about 15' x 4' installed by driving 3 of those green metal stakes into the ground and attaching with cord through grommets. They put these out in a place that gets quite a bit of wind, and the banners are torn apart within a few weeks. They are...

I am looking into hemming banners for the first time. Someone has recommended the heavy duty banner tape to me. These banners will be used outdoors and subject to Texas weather conditions. They plan on keeping them up for three years even though they know that banners are not recommended for...

We've all come across some awful looking banner signs at one time or another. #BadBanners can include spelling mistakes, wrinkled/sagging so it's unreadable, or (personal favorite) those banners that look like MacGyver was hired for the install. This thread is the Hall of Shame for photos of...

From Blight to Beauty in 24 Minutes! Only BannerSpring can turn a crumbling wall into a flawless wallscape in 24 minutes.When the City of Mansfield, Ohio asked a property owner to repair a deteriorating wall, Lind SignSpring was key to the solution. After some spot repairs to the wall...

Hello Everyone, We are currently seeking a new vendor (preferably in california) for printing oversize banners. We can print up to 5' in house but sometimes we need to print much larger. We had been using Tribute for the last few years but we got tired of receiving orders that were extremely...

My HP L26500 (new in 2013) prints a wavy pattern on the front 12-24" or so of each print. The pattern has way less ink in the wavy area, it looks washed out. I only notice this on 13oz banner material. I know it's not the temp because sometimes it prints fine. I am not sure why it would do this...

I will make a customer banner . I ordred a blank banner 13 Oz. and after i will apply my own 3M vinyl IJ35 or IJ80 ...Witch best ? But i want to know if i have to make a hole vent on it. The project to do a 36'' x 20' or a 24'' x 20' im not sure a this time but it will be outside for sure...

Making and installing a 24' wide by 54' tall mesh banner. Was planning on drilling holes and installing that way but customer just told us we cannot drill into building. LOTS of windows to use --- anyone ever trusted suction cups to hang something so big? Was thinking about a lot of these...

I'm Looking for a wholesaler for Banner Track systems for the side of building. I need 6 10 ft x 20 ft tracks. Any help in the right direction would be greatly appreciated. :thankyou:

Recent visits by outdoor and sign industry veterans resulted in their amazement. See for yourself on the video below. http://youtu.be/6YfEz0iThDI Lind 4'x16' BannerFrame Installation Visit LindSignSpring.com for more videos.

I need a tip or a trick. I'm printing some large banners and the sides of the material typically have lint. I try and burn them off with a lighter from the roll but still some gets through. I really don't care if it stays on the back side and does cause problems with head strikes. But I am...

I printed vinyl scrimm and I've had it in the shop for a few days. It's on my Mutoh VJ1324 and it printed very well. If I use my finger nail to scrape, it can still smear. Zeelon 13 oz gloss solvent banner is the material used. Is this common? I printed this on a vinyl and I can't seem to get it...

I have a customer that is looking to hang a few large banners (4' x 14'') on the side of their venue. They want the ability to easily change them out from month to month. Does anyone have a nice system or proven method for doing this ? Any info is greatly appreciated. :thankyou:

I am selling my Mutoh Valuejet 48" Large-Format Eco-Solvent Printer. $10,000.00. It is approximately 4 months old and has approximately 6 hours of use on it. There are no issues with the machine. It is in perfect working condition, and although it does not get used often, the...

We are using A Mimaki 54" jv33-130. When we print on 54 in banner material every so often there seems to be a black streak running on an angle on the print. We have tried several different brands of banner material and seem to have the same problem. All the other media we print on comes out...

We primarily use our printer for canvas but every once in a while use for vinyl banner. PROBLEM: The 12 oz vinyl is bubbling and the printhead sensor is touching as it passes. Any suggestions?