gerber

I have almost 20 years experience in the sign industry, and closer to 35 in graphics generally. I've recently relocated to the central Ohio area, after 20 years in Las Vegas. For most of that time, I was the Graphics Director of a sign company. I am highly experienced designing in sign...

I like to keep the programs we have up to date. There is a sale on the Omega upgrade 4.0 to 5.0 and I will need 2. They are $350.00+. Is it worth it or should I spend $1000 on something else? (We have a work station too). Thanks, Tina

Join us Sept. 16th in Atlanta, GA for our Gerber Day to learn how to use your Gerber equipment and Omega software to its fullest! Gerber representatives will be on hand for two sessions of Omega training. Demonstrations on the Gerber EDGE FX and EnVision plotter will be available to...

Hi, I have a HS15 Plus plotter. When I cut repeats, it's leaving a gap between them without having a gap. It was working properly until someone used it. I've tried everything I could think off but it leaves a gap by 1 mm which is not a lot but when doing a big job, it gets complicated. Can...

Just over a year old. Including 12 or more foils. Asking $18,000 for the pair, include USB cables also. PM for more info, located in West Central Indiana.

Firstly, I am printing on an Egde FX and plotting with an enVision. For a long time our company has been producing "metallic" decals using the ZeroNine Mirror Silver foil and Gerber Transparent Color Series foils. Just spoke to our rep at ZeroNine and it sounds like they are hinting at...

Open a World of Opportunities! Never before available, get it NOW from Graphic Marking Systems! ModelMarkTM is the latest innovative product developed by Graphic Marking Systems.This ultra-thin new material allows you to create graphics that will adhere to rubber. Have you been trying...

Hi, I am wondering if anyone has a Gerber Edge 2 for sale? I am currently in West Yorkshire, but I now live in Canada, and I have left my Edge 2 over there. I rushed back to the UK last week for family reasons, so I am looking to buy one for a few months. Thanks

I have a valid registered Omega 4.0 and use it to run my Edge 1. I design everything in Flexi (have 3 registered versions of that too) and I'm adding another plotter and Edge 2. I don't like the way Flexi outputs to the Edge so I was hoping to buy another Gerber software (older version fine...

Someone gave us an EmbossTrack 48 a year or so ago. It was in working conditon, but used. I went to start it up today and found that it doesn't power up! Is there anything that might be causing this? Power Cord? We are really not sure, as we have always used Roland products. This is my...

We have a older Gerber Edge and we recently have been having problems when printing a solid white. I have included a photo showing the issue. Has anyone else run across this? It doesn't do it every time ,but it seems to print that way more often than correctly.

Hope anyone can help me import my AI files in Omega - when they are drawn with clipping mask? When I do, the clipping mask are repealed so all the graphics are inside the Omega program. What do you do there? Is there a specific setting that makes the clipping mask remain? See illustrations for...

Hi Everyone, I just 'upgraded' from an old Lenovo to a newer Dell for use as our primary machine. We are using a Gerber Edge LE and a Graphtec FC4100-75. I reinstalled Flexisign Pro 7.6v2 and was able to get the Graphtec machine working perfectly. I can't RIP/Send anything when trying to print...

​Our Edge FX has been giving us a "fatal error 630" every time we try and print something. The head will lower, act like it's about to print, and then raises the head and then gives us the error. Gerber tech has replaced: motherboard, clutches, z motor, chassis cable, and it still gives the...

I was working at a sign shop using omega composer but have since parted ways. I have access to other plotters, but not the software and need to at least convert some files. I posted them at mediafire.com... http://www.mediafire.com/folder/g1c6zjcoxl8la/Group1 Worse case scenario I need the...

First off this is my first post here so...hello! I have recently purchased a Gerber Solara UV2 which I am having huge difficulty setting up. I have tried using the profile download client to get the installation files I need for X10 but for some reason I can't scroll down to select 'ok/install'...

My 15 year old GS15 Plus began jamming on the straight y-axis a few weeks ago, but was still able to do cuts as long as there was any kind of x-axis movement (curves). It began randomly at about 8-9 inches up and would only do it infrequently, but now it is getting progressively worse across the...

I run a local PC Repair shop. One of my customers has a SMIVB/GX4B. I believe it is a HS15 plotter. His computer stopped working and we were able to get another Windows 98 machine working for him. The problem is that the software was unable to be found. I have scoured the internet and...

hello all, i have a problem i need everyones help on. i have a GERBER ADVANTAGE AR600 3 axis cnc. the issue is this "X AXIS FAILURE" the story, i went down to my router room turned on the main power and everything beeped as normal when i went to the arc box controller the screen said slew...

We have a Gerber Sabre 408 router that has started to produce rough edges on routed pvc. We are using Enroute4. We have also noticed that the gantry is loose and we can move it by hand about a 1/16" in both directions when the table is idle. Has anyone had issues with "chatter" in the gantry...