hewlett packard

For the life of me I can't get Sihl 3683 (self adhesive paper) to run smoothly on an HP latex 560. Does anyone run this on an HP 560/570 and care to share their profile settings or any tips? The only way I can prevent it from buckling on the platen or in the curing unit is to attach it to the...

I hope this review can help other people in deciding if it is the right investment. Here’s my story. I have been a loyal customer and believer of HP, owning hundreds of thousands of dollars in ProLiant servers, printers, computers and a large format printer, until now. I’m extremely...

So the waste management cable broke in the back of the printer (the metal connectors snapped off one another and one piece lost), and the cost is about $500 to replace and we are getting a new printer in like a week :/ the censor isn't necessary, is there anyway to get around that error message...

I got a phone call today from Grimco! Hewlett Packer has announced the end of life for the HP L26500 Latex printer series! Parts, inks, printheads, cleaning kits and support will be discontinued. This notice will take effect in August! Grimco is offering some pretty sweet rebates for a new...

So I'm having a new problem with my HP L25500. It gave me a faulty print head error right before Christmas and it's been an oversized paper weight ever since. I went ahead and replaced #4 like it said. I know, replace in pairs, but for some reason I only had one in stock. So I replaced #4 and it...

While printing long job, material becomes crumpled under the rollers. Material - syntetic canvas (230-260 g/m2), 1.52 m width. Not at the start but may be at the roll half. And somewhere at the width center. Bumps appear on the material and then printing head begins th scratch it. Only stopping...

Hey all, I'm having a problem that I just can't seem to figure out. It randomly goes out of alignment and then prints fine. I have cleaned and oiled the carriage rails, cleaned the encoder strip, checked the belt and the gear drive for debris, ran a vacuum check, realigned the print heads and a...

I noticed that Oracal 651 (cad cutting vinyl) has a printability spec in their spec sheet. It says :thermal print capable. I am wondering does this mean I can run it through my HP 315 latex printer? I've got tons of this stuff for lettering but wondering if this is something that people have...

I've recently picked up a HP L25500 60" latex printer, and I'm having issues with the second print looks like it runs out of cyan. If I let the printer sit (off) overnight, the next day, it goes back to normal for the first print (or I should say, for the first few feet, I haven't printed much...

Hi there, I am looking for someone to come and help train me on my new HP 315. I find my customer support package insufficient for the amount of stuff I need to teach myself. You must know and understand the machine, SAI Flexi software, and know how to tile and should be a master on the...

Need help here, new to HP printing...... My HP 315 is not drying patches of ink in my prints. I tried turning up the heat up its already all the way up to its max setting. I am printing on 3 mil adhesive AVery 9223. black and white prints large scale about 13' x 22' Also By mistake yesterday...

We're running on some plexi, and I was wondering if there is a way to run a heavier or double coat of ink on the HP FB750.

Is it possible to print a document with multiple pages on separate foam boards, or do I have to break the job up? I know how to do multiple copies of a single image, but I'm not sure if I'm missing something.

We recently purchased an HP FB750, and we had no issues with edge printing when the installer was here, but I may be doing something wrong. It appears that the image is getting cut off where the media ends instead of overprinting on the belt. The margin shift laces the left and leading edge...

I've been getting this error lately on my FB700:: 'No Service Station Current Detected' error code: W-SS-5 I have been able to troubleshoot my way around most things on this machine but I don't even know where to start with this one. Its still printing and has not effected the quality but I'm...

Hi guys, So I'm a print tech at a wrap company and we've been have problems with color shifts in panels for a few months now while printing wraps. I've tried everything I know of to get this issue resolved with no success. We are using Onyx 12.1 and are running a latex 360 and 365 and printing...

Magenta Head #6 missing jets after running a Prime Test and Terrible Overspray on the Print test. Any idea on how i can fix this print head for some more longer use?

Join Advantage on Friday, January 27th at 1:OOPM EST for a joint webinar with HP covering the many features and benefits of the HP Latex New 300 and 500 series print technologies. Webinar attendees may be eligible to receive an LOI rebate. Offer of up to $2,500 off an HP new latex 300 series or...

I am interested to start a t-shirt printing and heat transferring company. I prefer to go with HP latex 310 or Mutoh 1324 or 1624 machine, latex machine versatile and can do more applications like wall, floor graphics and fine art reproduction. HP latex i was offered 28% discount on list price...

Hi Guys - Here's a rather silly question but we have a rush job that needs to be printed on retractable banner material, but we just switched from a solvent printer to a latex printer and unfortunately bought the wrong roll from Feller's. Their 10 mil Pop-Up material is not latex compatible but...