onyx

Have been running version 12 for quite awhile. Now they have released version 12.1 and on the Onyx website it says that one of the features is to be able to create G7 color profiles directly in Onyx. What they don't tell you is that you need to have Thrive to have it included for no additional...

Looking for anyone who might use this combination of products to see if i can speed up some of my processes and ways i do things. I know it is a long shot and i have asked this question differently but i asked it with individual items. Hoping maybe someone is in the same equipment boundaries...

When i was using flexi i could scare from the rip. I us some of the bad wrap templates and they are scalled at 720dpi. I could then select it and scale up by 1000%. In onyx i do not see an option to do this. Also in Flexi i could select different panels i wanted to print and not print the...

Hello everyone! I'm trying to setup for the first time a Afga Anarpurna M with Onyx 10 and can't make it work, the onyx says "cant connect ip" but the Ip respond to ping and the machine has the ip setup, I don't know if there is something to put in the "port configuration" under the ip number...

I have FJ-740K the RCR rip is not good for printing. So I want to use it with production house 12. I downloaded 6color profile with onyx profile manager. But I'm using 4 colors. I need 4 color color profile(waterbased) Does anyone have it? Thank you.

When i cut a file from Onyx cut service i always see the screen flash off scale then cut on the graphtec. So i just cut a file and seen it flash this. I then sent another file and off scale came on the screen and the blade went about 4 inches into media and went to far edge aross the whole...

61" HP 26500 Latex printer approx. 4 years old Automatic take up reel New printheads & inks includes Onyx postershop version 10.1 with dongle Printer is in great condition, this was an extra machine for us, no longer needed located just north of Boston, MA $6800 or BRO

Is there a way to change the cut contour mark size in onyx 12? I know in flexi it is set to 1 inch by 1 inch and .20 thick. Any place to modify this in onyx. Right now it pritns at like .5x.5 and i would like to make ti a little larger. Thanks

Ok so i am looking for general information. Someone who might be using the same cutter and onyx postershop at least. the printer side of it is not as important at this moment.. I have 2 other threads open but this would be a more direct question for someone using the same setup. Thanks

I am used to flexi as i could create a contour cut around a image out of Photoshop. We now have Onyx postershop 12 as of today and i am so lost. Can anyone explain how to create a contour cut on a Photoshop file or is there a way to do this inside one of the onyx programs. I have watched videos...

Onyx Production House 7.0 with USB dongle - $750. This is legit software(not cracked or pirated). We purchased it new to run a JV3 several years ago. When we bought another printer, it came with a newer version of Onyx and we began using that instead. Call/Text 434-249-4947

So running into all sorts of problems with Flexi cloud Version 12 when trying to create icc profile. Every profile i create always ahs some sort of issue and colors do not match across same media using different profiles with different pass ans resolution. We have been looking at onyx...

Hi all Just wanted to know if I can use profiles I have created in onyx x10 in onyx v7? I have just got a new printer with postershop and not production house so cant make them! if so where are them made and stored? Thanks Rob

I used barcode for years with my s2 140t cutter and now i traded s2 to F. I bought summa F support to onyx, it prints (hp 360) barcodes just like before but i'm stuggling with the rest :D I got used to barcodes so i'm not going back to stoneage again.. I tried to read the manual, is it possible...

My illustrator file (pdf) shows dimensions of "97" x 26" Onyx shows dimensions 26.56" x 97.89" My pdf doesn't have any bleed in it. Just wondering if anyone has any ideas why this would be different?

Hey everyone, Our company is looking to do some of our walls using the DreamScape Terralon wallcovering material. I have read many articles saying to overlap (which is what we normally do on walls with vinyl) and trim the excess off while some say use a butt joint (just print the panels, align...

Does anyone use onyx to run their roland? We have the latest version of onyx (12) and a roland xf640 and are having some trouble finding any media profiles. we typically print on 3M, for which there appear to be no profiles for any of their media for roland printers. Im wondering if someone out...

I just got an Epson S50670 with White Ink capability. I could really use some advice on how to setup a file in Flexi12 to print white as a solid, different opacities, and especially gradients. I also have the Onyx RIP that came with the printer. Production Manager doesn't seem to like the Epson...

I just got an Epson S50670 with White Ink capability. I could really use some advice on how to setup a file in Omega 5 to print white as a solid, different opacities, and especially gradients. I'm using the Onyx RIP that came with the printer. Any help and advice would be immensely appreciated!

My company prints on Roland XR 640's and HP 360 latex printers. We use Versaworks and Onyx. We print many small orders every day that need to be nested. We usually keep out sheet lengths between 40 and 75 inches, so the cutting is accurate. Some days we have 100 or more files that need...