print

How I use Lego as a Jig, sometimes deadlines don't allow time to get a bespoke Jig made.

Looking to see if anyone know of a good tutorial to walk me through a "print and cut" procedure. I have Onyx Gama Print Pro to Gama RIP and am printing on an Epson S30670, cutting on a Graphtec fc8000. I have Corel x7 to produce my artwork. The Onyx site was not inuitive, can anyone help? Thanks!

So basically im running flexi rip and the Mutoh VJ-628 when the printing starts it is very fast and basically moving back and forth with no pauses after about two sets of decals are done it starts to run super slow then after running slow for a few it again runs fast for a few more passes then...

OK first off im new to wraps and pretty new to photoshop. I have been all over the web looking for info or training on wrap design and Ive purchased dvds on photo shop, making templates, illustartor and none teach about how to go from a wrap design to a printable file. I need to know how to...

Any one seen this problem??? Was having this same problem with the cyan head. (Replaced head; everything is working [as you can see]) After replacement; the same problem with magenta head. Any ideas???

Hello everyone, I need a little bit of help. Basically what I'm trying to do is print some stickers using the CJV30, then laminate them with my laminator, then after they have been laminated put them through the CJV30 for it to cut. I have just tried to print one sticker (it has the registered...

Our Sc540 is printing weird all of a sudden. We were printing a pdf and eps file and the picture below is the result. The first 2 passes will be fine, then when the third pass hits, it goes off leaving a shadow effect that we don't want. Notice the side lines also. it was suppose to be straight...

Hey guys, A couple of days ago we started having an odd problem with our SJ-1000. All of a sudden half of cyan and half of black started dropping out for no reason. We haven't been able to resolve it and I've listed the steps taken below: - Performed printer cleaning cycles (which often...

Hi, My Roland RS-640 is printing strangely when file is containing a jpeg file in, even is tiff or pdf file that is printed. On the other plotter Roland VP-540 I don't have that problem, printed on the same profile. I cannot explane the problem so I've attached a photo. It's look like there is...

Hello, I'd appreciate any experienced thoughts about this. I currently have a Mimaki JV33-160 and a Mimaki CG-130fx II. The thing is that as of a year ago I've completely stopped anything that has to do with local market, and I make stuff to sell online. I sell on eBay and Etsy and my...

We are looking at getting some new equipment. Looking to get something that can do a direct to print as well as still be able to do roll to roll. We got a quote for the Rastek H652 UV Flatbed, just wanted to see if anyone out there has one or has worked with one. Just trying to see/hear about...

Hand painted pictures, procceced in Photoshop, printed with contour paths along with contour vinyls in various colors to complete the coverage of this van.

Dear Community, We are a Large Format Digital Print Specialist with HQ in Riga, Latvia. We have been present in Latvian and Scandinavian markets for more than 5 years and now we are exploring new markets and opportunities. . At the moment we are using UV and ECO-Solvent technology as well as...

Help please!! I have been doing signs for 6 years and started to sub-out prints. I have two fleets of trucks out there along with free standing signs that have worn out the same way within a time of 1-2 years ago installed. I am being ambushed by these customers to fix this and they are...

Looking for help! I recently had to reinstall my PhotPrint DX Software do to a computer malfunction. It's been a while since I had to go into the settings. But the problem I am having is that the prints are not printing the correct size...For example a 12" x 12" box is printing 12" left to...

Hello! I just picked up a Graphtec FC7000MK2-100 to supplement the prints I shoot out of my Mimaki JV33. I've gotten my Graphtec to plot out items through CorelDraw x5 (with Cutting Master plugin) but I want to figure out how to Contour Cut!!! I've tried searching the forums on how to get...

Hey Guys, I am new to this forum, looking forward a more active forum. I have a pic here from my cyan head off of my 545-ex. It was printing really crappy with alot of overspray outside of print area. From what I can see so far, these shiny spot on the nozzles may be some sort of...

:Canada 2: Hi everyone! I guess it's about time I introduced myself. My name is Derek and I've been creeping this site for some time now. It was just recently that I decided to create an account. I'm a vehicle wrap installer for a body shop planning to take the leap on my own very...

I am looking to see if anyone out there, especially Merchant Members, are interested in bidding on printing, laminating and contour cutting about 1.5-2 rolls of IJ680 for me per year for 5 years. The art is SIMPLE, but the ink coverage is high. It's for cop cars. We have the contract - so this...

My print quality has recently begun to degrade to a point where it was noticeable to me, and to no avail, I tried a whole bunch of things to correct it and made the following discovery. *And if I have miscalculated, it's because I don't fully know what I'm doing and have a need to better...