printer

Hey all. I am selling our Digitech Retrojet. We purchased this machine about 2 years ago and it is a total work horse. This machine prints beautifully up to a 5’x10’ panel. 4’x8’ prints in just under 3 minutes We are selling to upgrade to the Digitec Tru-Fire 1 minute per board $350k machine...

We have a Epson S80600 with Onyx as our RIP. We utilize Illustrator for most all work. So, when we load in RGB/CMYK counterpart colors to try and match the Pantone color codes, when we go to print, everything seemed to look fine. So we took our printed test color panels and matched them up...

Newbie here looking to get my first printer. Am really considering the HP 115 Latex printer. Would love to hear some thoughts from anyone who has experience with these latex printers from HP. I will mostly be doing medium sized prints ranging from 1 foot by 1 foot to 4 feet by 4 feet. Have heard...

I have some old equipment I need to get rid of. $800 takes both. The Mutoh printer is fully operational and has a media take up roll on it but it needs a new print head and lines. I used this printer up until a few months ago but not daily so little by little the head became clogged and it has...

We love HP's and the 315 is our backup to our 570. We never any problems with any of these printers. Our business has been slow for the past 8 months so we need to sell. I'm not sure how much to list this printer right now. I have to do some research. In the meantime, it won't hurt to...

I’m looking to get into sub printing on metal. Max size would be 24x36. Any recommendations for 24” sub ready printers that allow for oversized 24” paper to accommodate for the bleed.

Hi I have a roland sj-640 ex and I can't seem to get black working to it full potential, I've done a full manual clean, all the cleans in the settings, changed all of the cap tops, and ran a heap of test prints where I found black yellow and cyan all need work to get them to 100% What should I...

Hey guys I need a bit of help trying to get my printer to print without a rip or a software that's cheap I have a roland sj-640 ex and I'm using Onyx21 Ripcenter I had the license key sent from onyx America And they didn't take into account that I have an sj-640 So now that I spent $1800 on...

All sold.

We are replacing our 2012 (received January 2013) CET X-Press QX 4x8 Flatbed Printer. It has one row of heads CMYK plus White. White is not working, but otherwise printer is used most days. We have records of all issues and maintenance. Should be a good value for someone looking to add such...

We have an old but very great Roland SolJet XC-540. There's a spot on the printer about about 12" in. Whenever the carriage passes over this spot, the blade toggles up and down a couple times. It isn't dragging over the print or messing up the ink while printing, but it goes up and down, so...

Am in the process of moving to a new location and have two Roland printers to truck for four hours. (SC-540 and SP-300v) There are no keys or brackets with my machines to lock the print head stations in place, so am wondering what I must guard for and what method I can use or do to keep them...

Good morning everyone, Just recently, I've developed a problem with my Versacamm SP 300i. Any san serif or fonts with straight edges cut sloppily when small in size on my printer. I do not seem to have the same problem when the design is about 10" or larger. The machine used to cut small...

Hi I'm having trouble with my printer and looking to see if someone may be able to help its a mutoh vj1624. The printer recently stopped printing cyan so we took the head out to try to flush it out. After reinstalling the head in the printer it then wouldn't print at all we discovered one of the...

Well-functioning Epson SC-T7200 for sale. Still used almost daily, no clogged nozzles. Total 577 m2 printed. Including stand. Price $ 1700 excluding VAT

Good afternoon everyone. Just starting this morning, I've been having issues printing on my XC-540 Soljet printer. It was working fine before the weekend, but after running a job through, the print comes out misaligned and blurry. After trying a few calibration fixes, I cleaned the encoding...

I'm not very comfortable performing maintenance on the machine outside what's in the user manual. We're in a rural community 5 hours from the nearest distributor, so having a tech come help with stuff is too expensive. Does anybody have a link to a ho- to video for changing an encoder strip? Or...

My favorite part about the roland truevis vg-540, as an upgrade from the older models, is the TU2 setting. I'll print signs and vehicle wraps all day on the regular roll setting, then at the end of the day, set up a bunch of product labels (that have small text and print slower on a high quality...

Hey y'all, I've been having issues with a Roland TrueVis VG-540. I keep seeing these nasty banding lines, that will appear exclusively on certain parts of the graphic. Everything in a large logo will look great, but all the green parts will be banded. Sometimes all the grey parts. It doesn't...

Hey ya'll We had a power surge over the weekend, and now both of our roland printers are unable to connect to versaworks.Just focusing on the primary printer at the moment. On the PC, in IP config, the IP address is set to 192.168.0.1. However in network connection details, DHCP is enabled and...