problem

Hi everyone, I’m encountering an issue with a DX5 printhead, and I hope someone here can help. I’m a service technician and have personally replaced over 100 printheads, so I’m familiar with the process. In this case, I’ve ensured that the new head ID was properly entered each time. I...

Hi all; I'm having an overlap issue on my Canon Colorado M5W machine at the office. Example, today I do a test print of 3 tiles for my 110cm wide media. My order is w 315 h 260 cm and I divided each panel into 104cm under the onyx Tile tab. My overlap margin is 10mm. I used a 2px cutting...

Hello everybody I own a Summa S 120 T cutter and i'm facing a problem after i had to unscrew and lift up the tangential clamp (loosing 4 scews see pict) to remove a tangential blade wich was blocked alone. After mounting up everything the cutting is not horrible in sawtooth. Can anyone know...

Hi, I'm having a very strange problem that just started, where the paper is not advancing out the printer. It started as a vertical blur throughout prints. I cancelled the job the first time I saw the blur, then as it starts to advance out the printer to cure the rest of the print, it just...

Hi there! So, we bought a UV Flatbed printer (not going to name company for now) from China, with 3 Ricoh Gen 5 Heads (CM, YK, W) and it kind work good for most substrates. Paper, acrylic, no problem. The problem is PVC foam boards, and that's what we mainly use it for! Cyan color starts to...

Hi. I know little English. google helps in this. I installed a new head and a new damper on the mutoh 1924wx machine, but everything is not normal. there is air in all pipes. I checked everything but there is no solution. When I inkcharge everything is fine, but after 5 minutes there is air in...

Good morning everyone, Just recently, I've developed a problem with my Versacamm SP 300i. Any san serif or fonts with straight edges cut sloppily when small in size on my printer. I do not seem to have the same problem when the design is about 10" or larger. The machine used to cut small...

I’ve been having some issues with the heads on my sp300v, tried cleaning them but m/y head had nothing coming through and the blue was 95% clear and the black was about 40% on a test print. Decided to just buy 2 new heads with new dampers and cap tops (I could’ve cried after the deceiving...

Has anyone ever had a problem with sizes being off in Flexi 19? It seems to just do it randomly, I'll print say 20-30 meters fine then it will start printing jobs over size, then I have to restart the program or computer to be safe. It only seems to be in the vertical direction. I've never had...

Hi everyone, i need help with my Roland SP540, since a few days, i got horizontal line across the vinyl when printing (you can have a look on the attached image) and this can appear right after starting or after printing 50 cm, or none, or more and less... test print is really good, encoder...

Hello, for three days I have had the same problem. I tried all the cleaning modes as well as the nozzles wash for 5 and 20 minutes. I also noticed an incorrect alignment on the MAGENTA. Please help me. Mimaki CJV150-160

Hello I have a problem with the printer Roland RE-640. Pleas help me!!

We have a Summa S2160T. We print groups of labels back to back. Nothing fancy just rectangles with rounded corners about 2 to 3 inches wide by about 15 to 16 inches long. We group them in 2 row groups to make cutting them down easier. The past couple days I noticed about every 4th or 5th group...

Hi! im having this issue when i start to use the cutting mode. It looks like the cutting starts to moving and the end points don't match. The curious thing its not always do this kind of error. Some one has a clue of what happen with my machine? I really will appreciate any help. Here...

So, We are having a problem with our mimaki cjv 30-160, Every time we print something, the length is always shorter than what its supposed to be, but the width is always right, ive tried everything i could think of, been on numerous forums trying to solve this problem. for example, i just...

Hy evryone, I've recently bought the IMPACT VEHICULE OUITLINES VECTOR LIBRAIRY and we are facing size problems from the begenning. It seems that every outlines files using the EPS in illustrator do not match the real ones on cars. There are always too small than the real ones. As anyone already...

HY guys I've just bought a used HP 360 LATEX but i can't find a way to connect it to the PC. I'm using Signature RIP and the printer is connect by ethernet to the PC. I've chosen an IP adress manualy on the printer/PC but nothing comes to the PC. I've also tried using automatic IP and default...

We have a SQP ORYX3 printer, 7 months old and nozzle check isn't as perfect as in the beginning anymore. Here are the pictures of nozzle check before and after 7 months. Nozzles are all but don't spray straight anymore. Nozzle checks before 7 months: Nozzle checks now: (Click on image...

Hi. I´m new here and hope to get some help. I got myself a Mutoh VJ-628 from an old client/competitor. First the machine didn´t print anything and then after couple of tries when the machine was powered on head only moved for couple of sentimeters(1-2 cm). Can someone give pointers where to...

I have a part time business engraving death dates on headstones and I use a gerber gs 15 for my stencil needs. It cuts the dates on the stencil but the head doesn't pick up off the stencil after cutting each letter and number. Therefore, it makes dragging cuts as it's going from one letter or...