Search results

Hello All, I am trying to do a nozzle wash but when I fill it with liquid to do the wash I can see the liquid is running into the waste bottle. Is this mean my pump is gone bad? If you have experience this before what was the fix for it? Thanks in advance...

Hello All, I noticed on my JV33 accumulation of ink under the capping station and i pulled out the clean it and noticed that it started seeping down under where the absorbent pad is. I think it is seeping left of the cap top and than down below. My question is, did anyone experience the same...

Hello Everyone, Can any one give me a quick tip how to eliminate double cut on Onyx Production House. The decal is rectangular and printed butt up against each other all I am wanting to do is cut them rectangular without a double cut. :thankyou:

Hello all, I am looking for a media recommendations from you y'all please. I am needing to print as large as 8.5"x11", as small as 3"x5" sizes. It needs to be easy to apply with no bubbles, easy to remove and whenever you remove, it should never leave any adhesive residue behind at all. One...

Hello Everyone, I am trying to create a new media profile on Onyx Production House and when it comes to print the ink restriction swatch it acts like it is going to submit to data to printing que but it doesn't and it gets disappear another means you can't see it in the RIP que but it thinks it...

Hello everyone, When I place my media to CG-130FX to contour cut, as usual first it checks placements of the 3 wheels and returns to home position. But now, almost immediately looks for a detection mark and it fails with error 36. This is exactly what is wrong. It just started doing this. Any...

Hello everyone, Can you guys give me any tips printing on clear cling with JV33 and perhaps cutting? Thanks in advance

Howdy Ya'll, Can air in the JV33's damper connector cause a problem? Check it out in the picture attached to this thread. I can see a air bubble moving and whatever I tried I couldn't get rid of it. I believe this is the reason the tech decided to change my JV33's printhead because he couldn't...

Hello All, Please take a look at the attached picture and you'll know what I'm trying to ask. I didn't know how to describe the problem. Sometimes a picture worth thousand words. Could anyone suggest what causes two tone effect and how to remedy the problem. One band is slightly lighter than...

Happy Friday's Ya'll.. On my machine whenever I print something centered there is always 1" extra on the left hand side. If I was to print left or right justified it is OK but centered is always off. Is it due to machine set up or somewhere in the maintenance menu or rip related? Thanks...

Hello Mimaki experts, What might cause the attached picture? (yellow is not firing 100% after a normal cleaning comes back) Well, after a normal cleaning black is gone. (picture 334) It did it while it's printing attached picture 333. Any comment is welcome. Thanks in advance.

Is there a better way to clean the Epson 9600 printhead beside from using the control panel or printer driver? I do not use the printer very often and when I need to use it, it take a long time to clean it and it wastes a lots of ink by doing so. Any help would be appreciated. Thanks,

Hello Everyone, Why the the printer reads the media smaller than what it is? For instance, if the media is 54" typically it reads 53.22" or 53.30" or whatever you got the picture. However sometimes it reads it 48" or so. I thought the media holders got dirty so I wiped them clean, as well...

Can head refresh rate be adjust it from the control panel? If yes how? :) Thanks,

Hello everyone, I printed 24 up 6"x1.7" on a digital vinyl on my JV33. The printed sheet is about 27"x 25". When it comes to die cutting(contour cut) them the CG-130 FX II is acting up, it cuts the first row perfectly, but as it goes on second row the cut moves upwards and as goes to third row...

Hello Everyone, I just finished a 330" banner printing, 165"x2 non stop. I noticed a color shift on the print out where 2 or 2.5 feet was left to finish the job. As soon as it finished printing, I did a test draw and there it was, no CYAN and BLACK on the left channel. Afterward, I did a...

Attached are the pictures to a problem. I need to find out why it is happening. Any help would be appreciated. I did a NORMAL cleaning and I do not know if it fixed the problem yet. I am trying to be proactive. Well, I just did a test draw the CYAN was gone. Doing a another cleaning now...

Hello everyone, How do you guys run your solid BLACK color? In printing (sheet fed) if you want your black to be dense we run it 33% C, M, Y, & 100% K. Any suggestions? Thanks, Demir

Any of you guys are using any type of UPS to protect the printer from power failure? If you do what type. I tried using APC 1500 but every time I turn on the printer because of the heater, the APC goes nuts due to fact it is not rated to handle more than 12 or 13 amps. I looked at the higher...

Has any of you tried cleaning the dampers and re use it? I do not know why it can't be done or it would harm anything that is why I am asking. Please give me your input.