error

I have an error code on my Mimaki: System Halt (2) 306: X Ether CN Anyone have any ideas on what to do with this? Thanks.

need advise , running machine perfect, disconnect it due storm lights, when i turned it on again to start working bumps this errror msg !car (#01) cartridge m-- ,try to print and send a msg , an ink error ocurs, i have the refillable ink system by t way. all comments are welcome ! thank you...

Hi everyone, we recently bought an Artis 3060U. We are having an issue while printing after couple successful runs. Uv printer sound - YouTube 0:22sec Theres a noise happening and the printing stops and both lights flash indicating an error. When we printed, it basically did A1 until 1cm left...

Of course this happened on a Friday trying to get another RJ900C set up for a large project with a tight deadline. We made a critical error when in a hurry and entered the wrong serial number. With that said we did receive an activation code but for the wrong serial number Product Name...

I'm running the subscription version Flexi 12 on a stand alone laptop designated for RIP only. We don't use it for anything else at all. Whenever I try to rip multiple longer runs I occasionally get this Lack of Data Rip Error on our HP L26500. I know one time we were transferring a file via...

Hey Guys, long time listener first time caller... Ref: Graphtec FC-7000-160 (Signwarehouse Q-160) So last night I used my arrows keys as I have for years to move the media forward after a cut job was finished to cut off the job. I get an X Axis position error. So I turn it off and have it do its...

My Z6100 printer is not booting up and has the error code 8:11. This issue happened once before this and I was able to take out all the inks and printheads and got it to boot, but that solution isnt working this time. Prior to this problem, I was trying to advance the paper and the printer got...

running the demo on ph, seems it will not rip any pdfs I send to the hot folder. Jpegs print fine and .tiff keeps printing pixelated. I love the color profiles in this program but keep having to go back to rasterlink to print here is the error I get 22:38:58: Start Process RipThe image...

Everytime I order from them I get this error at art upload. Am I missing something here? Sorry for low res it was a screenshot

hi folks. i have had my printer of for a while . and when booting up it wanted to do a clean . and not a small clean but a clean with cleaning cartridges. fine so long . loaded cleaning cartridges and was under way . but when installing ink cartridges again i got error not original tried...

Hey All... Came into work today and turned on my printer. It showed all my inks were empty...and they were, my waste tank was full too...that was the 1st thing Replaced all the inks and the printer went through it's start up, did a cleaning. The width came up as 0 and then it says internal...

I have a VS-640 and after printing for a few minutes into a job it just stops printing. It doesn't beep or anything, it just stops. The LCD display on the printer says "NOW PROCESSING" and Versaworks shows "printing" as the status. After sitting for 10 minutes or so, it beeps and show "INTERNAL...

Hi everyone. You will probably think I'm a bit weird because I'm using the L26500 just for a bit of a hobby rather than a serious business. Mainly because it came up at an ok price and I took a gamble that it would work ok. I replaced a couple of printheads to get the machine working when I...

Every morning we run a nozzle check, the last 2 weeks we have been getting a media jam error anytime we run a check. It will print the patterns but the carriage will stop in the middle then give me the error message, so each time we have to power down the printer and back on again. This...

My Summa S160T is throwing a Y-Axis Error Overflow when I'm trying to cut vinyl. When I slow the machine all the way down, I can get it to work, but when I set it back to it's normal speeds, it won't work. It seems as though the cut head is moving entirely way too fast when it's saying Y axis...

Hello again everyone. Hope everyone is having a great night. New issue here. I have a 2: circle that the center is a american flag. This design was created in illustrator and the flag area is a mask. I open the file in flexi and i fo to step and repeat b/c i need 500 of these printed and...

Hey everyone, I came in this morning and started printing a banner on our L25500. Everything was going fine, but it stopped mid-print and said something in regards to there not being enough power for the heating module. I took a look at the back of the printer and one module was flipped and the...

Hello! :smile: I hope somebody here can help us. We desperately try to get a Mimaki CG-130 FX Cutting Plotter to work again with a Windows XP PC. It runs with firmware 2.00 and as what I've read until now, this is the reason why it's denying to plot, whereas the latest driver (3.40) is...

I am trying to create a profile with Caldera for my HP L26500. When I open Easy Media, select the printer and click Next, I get an error message. It says, "easymedia: Exit with error". I thought I needed to upgrade Caldera, but on Caldera's website it says L26500 is not supported. I've been...

My Mutoh VJ1624 has been printing this job for over two weeks and suddenly we started getting weird lines and what appears to be test prints in the middle of the image. I was getting a Head Heat error before this started happening, and I'm not sure if that has anything to do with it or not. Has...