error

Any suggestions would be greatly appreciated! I have a Mimaki Jv3-160s. I had to change a damper on it yesterday and also while I was there I changed two of the ribbon cables that connect to the print heads. Anyway, when I fired the machine back up, I got a display message that stated error...

There is a problem!!!! when opening the drawing of AutoCAD 2007 writes me: “ Cannot find specified drawing file. Please verify that the file exists”. what to do with it?dwg

Hi All, I have a practically new GCC Expert 24 that has ALL the panel lights on. The error light is solid, not blinking. I use Cadworx Live and Vector Cut. When I send it to Vector Cut it works fine...it cuts perfectly, but the lights won't go off. Any suggestions or ideas what it could be...

​Our Edge FX has been giving us a "fatal error 630" every time we try and print something. The head will lower, act like it's about to print, and then raises the head and then gives us the error. Gerber tech has replaced: motherboard, clutches, z motor, chassis cable, and it still gives the...

Hi guys. I just bought a used (almost new) CE5000-60. Have set it up, followed all instructions, but it still cuts HORRIBLY bad! I have posted 2 pics of my problem, that i cant seem to come past. I cut with original settings, and i use Signtcut pro as software with no altered settings. Do...

Hi, We recently changed computer set-ups, and I have been working on getting everything back up and running. I am running the X10 Onyx RIP software, and when I go to print a file, it gives an error message saying it cannot print. I contacted Onyx and they said it was between the computer and...

Giving back to the community and whatnot... I don't know if you guys have run into the problem in onyx where you try to use the media manager or layout tool or some such and it gives a JVM module error. I was pulling my hair out doing all kinds of searches for this...

Very infrequently, I'll feed a PDF into Rasterlink(v5) and instead of RIPing the PDF normally, I'll get a blank white image. The dimensions are correct, there's just nothing but whitespace where the image is supposed to be. I've had this happen on two different computers that are hooked up to...

I'm using a fairly old Camm-1 Pro and it's been very glitchy lately. The most recent glitch is all of a sudden it's been feeding the material way too fast. I don't mean the regular speed setting though. It's cutting at its usual speed but in-between cuts, when it's moving to the next area, it...

I have this error code pop up often. "Composer - Module GspCvtrCtlFn.cpp Line 1605" "Error 12 writing file, file not written. Try Save As with new filename." It is quite annoying, it usually takes 4 or 5 tries to save the file. Does anyone know what causes it? Thank you for your help...

I ask? This component is damaged on the driver head. What error would present the printer? Mutoh Rockhooper II Element: Offsite pics replaced. Please read our rules and instructions on photo posting.

Hi. I have a problem with my Mimaki JV22-160 plotter. Ever since I got it, I'm getting random I/F Board Error 20 errors. On the manual here's the explanation for this kind of error: "Improper operation has been conducted on the operation panel". Here's my setup: PC: Pentium Dual-Core...

Help! I need a manual or guide of error codes for Mutoh Falcon II Outdoor?

I was using Flexi 8.5 when all heck broke loose. Windows did an automatic update between 6/17/11 and 6/20/11. This has caused Flexi to crash every time I try to open it. I even tried to install the fix "Flexi 8.6" on a different machine that went through the same updates. My machine did not...

Hello, Our black head needed replaced and for about 2 weeks after replacing the head the printer worked great, (We put in the correct serial numbers). One day about 3 weeks ago it started banding straight black acrossed any material while at the same time print CMY normaly. first I tried letting...

I'm exporting a pile of miscellaneous vector files (clip art etc) from my old Inspire 1.6 software, and importing into CorelDraw 12. Most of the EPS files import perfectly, but some won't import at all, and I get an "Import Error" message as follows: "stackunderflow error reported by the...

Hi everyone!, Today when I started my day at work went up in my Rockhopper 3 printer and gave me the following message A259 Alert System - Hardware not found. Find a colleague you tube with the same problem but does not say whether it has been solved. http://www.youtube.com/watch?v=rPevXiMI8lc...

Hello every one I just signed in and was wondering if some one can help me with a problem that I have with my linx 60 from GCC. I havd this plotter for about 8 years now and been haveing trouble with it it just wont cut, I have been working wit corel draw 12 and cutting from it and WinXP sp3...

Okay I'm all out of ideas here. My plotter no longer wants to cut correctly. When cutting any letter with a curve for some reason it is unable to find the start point to complete the cut. It is generally 1mm off mark left to right. I stress the left to right because if it was as simple a fix...

:helpI have experimented turning the DIP switch SW-8 & 9 from off to on (per Roland's advice). Tried to cancel the error with the setup key. Moved the pinch rollers every-which-way and still cannot shake this pen mode. This has shut me down. Roland says my mainboard is shot another shop says it...