roland 540

My printer keeps cancelling the print in the middle of a job. Never in the same place. Any ideas as to why? I have several high end wraps going and can't simply seam them every time the printer decides to take a break.

Good afternoon everyone. I'm currently experiencing an issue with our Roland Soljet Pro III 540 XC. I've made some hard hat stickers about 3" x 1" and printed 250 of them, just over 20" long of material. I've laminated the print but I realized that earlier during the drying period, I...

"Service Mode Protected". sp540i can anybody help

Hello again, I'm experiencing another printing problem with our Roland Soljet Pro III 540. I'll have images attached here below: The media I'm using is Scotchcal film, high gloss, with air release. I can't remember the number, sorry! Anyway, these purple, dust-like sprays are more...

Good evening, everyone. I'm currently experiencing an issue with my company's Roland Soljet Pro III XC 540. When I print black letters on glossy, white material, this is the result: This was with Bi-Directional printing, but also happen with Uni-Directional Printing. Splatters seem to be...

Hi! Is anyone interested in an older graphics printer? It is in GREAT condition, but it is about 10 years old. Condition: Excellent / Great Make / Manufacturer: Roland Model name / number: SP-540V VersaCamm 2004 Size / Dimensions: 2390 (W) x 800 (D) x 1291 (H) mm Price: $3500 OBO...

Hi I am trying to run a print and cut job with multiple pages and after each page there is 4 inch gap between the next page. Does anybody know of a way to minimize that 4 inch gap? Is it a printer (Roland VS-540) thing or a RIP setting?

So I started up my printer for another days work yesterday and loaded some vinyl to cut: When I pressed the SETUP key to measure the vinyl after i'd positioned it, it suddenly ran off 7 feet or more of vinyl then sucked it all back to the beginning. Pre-feed option is OFF in the menu. No...

Hello, this is my first post in this great community. I haven't introduced myself in an another thread but i would like try to share my failures with my Roland VP 540i. First of all, I want to tell that we just bought the printer four weeks ago. The heads were fine, but now we wanted to start...

Hello, First time poster here! I am creating custom profiles for my schools Roland VersaCAMM 540 (self study) and I am running into a gradient/blacks problem.. I'm using a (gretag) X-rite I1pro (Version 1) and the accompanied Eye-one Match software to create the icc profiles.. The problem...

My printer has been out for about 3 weeks now, at first I thought it was the pump cause it was not pulling ink. I replaced the pump, and it started pulling ink. Now its just not printing at all. I did the empty mode and filled the ink in again. Now it seems ink is stopping before it goes through...

ok sooo! my print status on versaworks is racing to 100% and finishing early when its really just started the print. i have been told this could be a mainboard issue but for what thats going to cost me im hoping there is another solution. if i restart the computer and printer numerous times im...

I am looking for someone with a vs 540 to help me with dip switch settings. Recently reset the NVM and now i need the parameters in service mode. Any help would be greatly appreciated.

Hello, i am hoping i can get some advice from someone/anyone! I'm attaching my test print for my 54'' roland sj 540. I've only had this printer for about 8 months. The previous owner used only roland inks and the test prints were just about perfect. I've since switched to using Triangle Inks...

Two questions: 1) Where is the best place to buy replacement DX4 print heads? 2) does anyone have a video or step by step procedure for replacing heads on a Roland SC-540? Thanks! David.

Hi, When I run a test print the light cyan looks pretty good overall (see the black arrow on the attached image), but images containing blue will get a slight over spray of cyan. A test print in service mode shows the light cyan to be misaligned in sections of it (see red arrow). Has anyone...

Back before I got smart and labeled all my materials I bought some great poster paper that I am now running out of and don't know who made it. I print on a Roland VP-540. What (in your opinions) is the best Eco-Solvent poster material that is NOT polyester ? I've tried SIHL 3629, but had...

Hello all! I hope I am posting this in the correct spot. My question I am wondering if you guys can shed some light on or give some advice is this: Should I buy a used VP 540 that turns on, tries to print, but no ink comes out of the heads? The guy says he bought it at an auction and was going...

We have a Roland XC-540MT printer. For the most part it is awesome, and I love the ability to print in white and metallic. However, we don't have to do that very often, so we keep running out of metallic and white ink (through the automatic cleanings) before we get a chance to use it. I'm just...

Not happy at all with the results I'm getting. My normal everyday use profile, SAT up 30, Overprint 2. Thanks